Table of Contents
Advertisement
Enable or disable the monitoring of the system's temperature,
volume, and CPU fan. The default is
ECC or Error-Correcting Code tests the accuracy of data as it passes
in and out of memory. This parameter enables or disables the
monitoring of this function. The default is
PCI or Peripheral Component Interconnect is a 32-bit bus that
supports a 64-bit extension for new processors, such as the Pentium.
It can run at clock speeds of 33 or 66 MHz. This parameter monitors
the activity of this bus when set to enabled. The default is
System Event Configuration
CPU Temperature Threshold
Warning Degree ..................[ xx] C
Fatal Degree ....................[ xx] C
System Voltage Threshold
Acceptable Tolerant .............[xx]%
= Move Highlight Bar,
CPU Temperature Threshold
There are two threshold levels for this parameter.
warning degree and the other is for a fatal degree. Whenever an
event exceeds the threshold setting, the system will log the event in
the event log area.
BIOS Utility
TEMP/VOL/FAN
Disabled
.
ECC
Disabled
.
PCI
= Change Setting, F1 = Help
Disabled
.
Page 2/2
One is for a
2-39
Advertisement
Table of Contents
