Table of Contents
Advertisement
Disassembling the Upper Case Assembly
Detach the function board FFC from the function board.
1.
Remove the two screws fastening the function board to the upper case.
2.
Take out the function board from the upper case.
3.
Detach the touchpad board FFC, fingerprinter FFC, and fingerprinter cable from the fingerprinter module.
4.
Remove the two screws fastening the fingerprinter bracket to the upper case.
5.
Removing the Fingerprinter Module
Remove the three screws fastening the fingerprinter module to the bracket.
6.
Take out the fingerprinter module from the bracket.
7.
62
Chapter 3
Advertisement
Table of Contents
