Removing The Hard Disk Drive Module; Disassembling The Hard Disk Drive Module - Acer TravelMate 340 Service Manual

Removing the Hard Disk Drive Module

1. Remove the screw of the hard disk module.
2. Slide the hard disk module out from its bay.
1
NOTE: After loosening the hard disk drive screw, you must completely remove it so you can then slide out the
hard disk drive. It may be a little difficult to completely remove the screw.

Disassembling the Hard Disk Drive Module

1. Gently, detach the connector from the hard disk module.
2. Remove the two screws on both sides of the hard disk module.
3. Remove the hard disk plate from the hard disk module.
4. Slide the hard disk out from the hard disk drive bezel.
5. This completes the disassembly procedure of the hard disk drive.
1
New added description. Please pay attention to this note.
44 Chapter 3