Sony KLV32S400A - 32" Multi-System Dual Voltage HDTV LCD TV Manual page 78

Step 5: Preparing for the
installation of the TV
Before detaching the Table-Top Stand, disconnect all
the cables from the TV.
1
Remove the screws from the rear of the TV.
Then detach the Table-Top Stand from the
TV.
Notes
•
When removing the Table-Top Stand from the TV, lay
the display face down on a stable work surface that is
larger than the TV.
•
To prevent damaging the surface of the LCD display,
make sure to place a soft cloth on the work surface.
Soft cloth
2
Secure the Mounting Hook from the left side
of the rear of the TV.
1 Secure the Mounting Hook to the rear of the TV
temporarily, using the supplied two screws (+PSW4 ×
12).
2 Be sure that both screws are tightened securely with
equal torque strength to the rear of the TV.
Notes
•
If you install the right Mounting Hook first, it will be
difficult to adjust its angle. Install the left Mounting
Hook first.
•
Be sure not to use any screws other than the supplied
ones (+PSW4 × 12) when securing the Mounting
Hook.
Screw
(+PSW4 × 12)
Mounting Hook
GB
Soft cloth
3
(GB)