Osd Setup; Card Reader - Dell W2600 - 26" LCD TV Manual

OSD Setup

OSD setup allows you to adjust the appearance of the OSD, set the channels when in TV mode,
change the language of the OSD (see "Selecting Your OSD Language" on page 26), and restore
factory settings.
SETUP
BACK
OSD SETTING
CHANNENL SETUP
LANGUAGE
FACTORY RESET
DVI SETTINGS
Source — The default setting is Auto. The TV automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source, PC or Video,
depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change
the setting to YUV.

Card Reader

A card reader allows you to view digital photos on your TV.
MAIN MENU
EXIT IMAGE
INPUT
MGMT
SELECT
Your card reader supports the following card types:
• Compact Flash
• Secure Digital
• Memory Stick
Use OSD Hold Time to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the OSD Setup menu, you can select TV Button Lock
to lock the buttons on the side panel. When this option is
enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
If you are using the DVI connector, you may need to verify
the following settings:
PIP/POP
PICTURE COLOR
PBP
SETTINGS
SIZE
SETUP
Using the On-Screen Display
31