HP C7401A - SureStore Ultrium 230 Tape Drive Technical Reference Manual page 29

Parameter Value
<no. of 4
densities>
<density n> 0x00
<density 3> 0x40
<default 3
density>
So indicates variable record length,
0xd639
timeouts for erase, EOD recognition, Unloadable device driver, 5 x longer
timeouts, buffer writes and pre-acknowledge sucess, variable records not
limited to 64 KB.
There are four densities following in the parameter list.
Creates a device file with compression disabled.
The density code for data compression enabled by default.
Density 3 ( ) is the default.
0x40
Values for the parameters for
Parameter Value
target X
X
Specifies the LUN for the device.
lun 0
Meaning
and
bsf
are as follows:
name
Meaning
specifies the SCSI ID (target) of the device.
Sun Systems, Solaris (SunOS 5.x) 29
enabled, long
bsr