Page of 2
Download Bookmark Comment

Sony SRS-BTX300 Operating Instructions

Operating instructions.
Hide thumbs
   
Tips
4-449-951-12(1)
Tip
1
Make the Bluetooth connections between the
Specifications
Troubleshooting
 When the system is turned on first time, the Bluetooth
 If it is difficult to establish the connection, try the following.
system and a Bluetooth music player via
Activate the app "NFC Easy Connect" and move the
indicator (blue) starts flashing quickly.
smartphone slightly on the N marked part of the system.
A2DP, and between the system and a
If the smartphone is in a case, remove it.
AUDIO POWER SPECIFICATIONS
Bluetooth mobile phone via HFP or HSP.
VOLUME −/+
 Touch the system with the smartphone again to disconnect.
buttons
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
For details on the Bluetooth connection procedure, see
 If you have multiple NFC compatible devices, just touch the
"How to Make Wireless Connection with Bluetooth
With 6 ohm loads both channels driven,
SOUND button/
smartphone to a different device to switch the connection
from 150 Hz - 10,000 Hz; rated 10 watts per
indicator
to that device. For example, when your smartphone is
Devices. " When the Bluetooth connection is established,
channel minimum RMS power, with no
connected with NFC compatible headphones, just touch the
the Bluetooth indicator (blue) on the system stays on.
smartphone to the system to change the Bluetooth
more than 10% total harmonic distortion
Tips
in AC operation.
Personal Audio System
connection to the system (One touch connection switching).
No sound / Sound from only one speaker /
 To use only the calling function of a Bluetooth mobile phone
LOCK RELEASE
Speaker section
(call) button
AUDIO IN button/
that also has a music function, establish Bluetooth
Low sound level
switch
indicator
Listening to Music
connection between the system and the mobile phone via
Speaker system
Main speaker :
HFP or HSP, not via A2DP.
Operating Instructions
70 mm (2
4
/
in) × 2 (FULL RANGE)
5
 Depending on the Bluetooth mobile phone, while the
Passive speaker:
BATTERY/CHARGE
Manual de instrucciones
You can enjoy music wirelessly, via the Bluetooth function built
Bluetooth connection is established via HFP or HSP, the
103 mm × 60 mm (4
1
/
in × 2
2
/
in) (w/h)
indicator
10
5
other Bluetooth connection via A2DP may also be occupied
Check that both this system and
Check that the side stand is
in your devices.
Enclosure type
Passive radiator model
N-mark
BLUETOOTH -PAIRING
by the same Bluetooth mobile phone. A Bluetooth music
the connected device are turned
opened.
Flashes quickly
player cannot be connected with this system in this case.
button
Amplifier section
on.
The system automatically turns off
Side stand
when the side stand is closed.
Bluetooth indicator
Note
Reference output power
 To make the same connection with the same devices after
10 W + 10 W (AC adaptor, at 1 % harmonic
distortion, 1 kHz, 6 Ω), 4 W + 4 W (Battery,
turning the system off, follow this procedure again.
4
at 10 % harmonic distortion, 1 kHz, 6 Ω)
Perform the pairing procedure on the
Bluetooth device to detect the system.
Bluetooth
Turn up the volume of the system
If you are connecting a personal
To Enjoy the Sound Effect
and the connected device.
computer to the system, make sure
Communication System
/ button
5
Select "SRS-BTX300" shown in the display of
the audio output setting of the
Bluetooth Specification version 3.0
Setting
the Bluetooth device.
computer is set for a Bluetooth
Output
Bluetooth Specification Power Class 2
©2013 Sony Corporation Printed in China
device.
If "SRS- BTX300" does not appear on the device's display,
Maximum communication range
You can enjoy sound effects as desired.
repeat from step 2.
Line of sight approx. 10 m (30 ft)*
Illumination lamp
Microphone
1
SRS-BTX300
Operations may vary depending on the Bluetooth device.
1
Press the SOUND button to select the sound
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Note
Refer also to the operating instructions supplied with your
Check that the connected device is
Pair this system and the Bluetooth
effect.
Modulation method
 Some devices cannot display a list of detected devices.
Bluetooth device.
being played back.
device again.
FHSS
The SOUND indicator (see below) shows the current sound
6
1
If Passcode* input is required on the display
Make the Bluetooth connection between the
Compatible Bluetooth Profiles*
2
effect setting.
— Increase the separation between the equipment and
of the Bluetooth device, input "0000. "
system and the device.
A2DP (Advanced Audio Distribution
English
Personal Audio System
You can switch between effects by repeatedly pressing the
receiver.
Profile)
The Bluetooth connection is established and the Bluetooth
SOUND button.
For details on the Bluetooth connection procedure, see
— Connect the equipment into an outlet on a circuit different
AVRCP (Audio Video Remote Control
Before operating the system, please read this guide
indicator (blue) on the system stays on.
"How to Make Wireless Connection with Bluetooth
Profile)
from that to which the receiver is connected.
* Passcode may be called "Passkey, " "PIN code, " "PIN
thoroughly and retain it for future reference.
Devices. " When the Bluetooth connection is established,
Status
Sound effect
HSP (Headset Profile)
number, " or "Password. "
the Bluetooth indicator (blue) on the system stays on.
— Consult the dealer or an experienced radio/TV technician
Check that both plugs of the
If the connected device is monaural,
Owner's Record
HFP (Hands-free Profile)
for help.
2
Amber High-quality bass sound will be heard (MEGA
connecting cord (not supplied) are
sound will only be output from the
Tip
Start playback on the Bluetooth device, then
Supported Codec*
3
firmly inserted into the system and
left speaker.
The serial number is located on the inside of the side stand.
 To pair with other Bluetooth devices, repeat steps 2 to 6 for each
BASS). This setting is enabled by default when
SBC*
, AAC*
For the customers in the USA and Canada
adjust the volume.
4
5
the connected device.
Record the serial number in the space provided below. Refer
device.
you first turn on the system.
Transmission range (A2DP)
to them whenever you call upon your Sony dealer regarding
Set the volume of the Bluetooth device to a moderate
RECYCLING LITHIUM-ION BATTERIES
20 Hz - 20,000 Hz (Sampling frequency
level, and press the VOLUME –/+ buttons on the system.
this product.
Notes
Green Surround sound will be heard (MEGA
44.1 kHz)
 Pairing mode of the system is cancelled after about 5 minutes,
Auto power off
Lithium-Ion batteries are recyclable.
Model No. SRS-BTX300
BASS+SURROUND).
*
1
The actual range will vary depending on factors such as
and the Bluetooth indicator (blue) flashes. If the pairing mode is
The system automatically turns off after about 20 minutes
obstacles between devices, magnetic fields around a
You can help preserve our environment
cancelled while performing this procedure, start over from
Serial No. ________________________________
when the hands-free is not being used (the system is not
Off
The sound effect is off.
microwave oven, static electricity, reception sensitivity,
by returning your used rechargeable
step 3.
connected with a Bluetooth device via HFP/HSP), and when no
 Passcode of the system is fixed as "0000. " The system cannot be
aerial's performance, operating system, software
batteries to the collection and recycling
RESET
device is being charged via the DC OUT ONLY connector, and
location nearest you.
paired with a Bluetooth device whose Passcode is not "0000. "
application, etc.
AUDIO IN jack
For customers in the USA
button
when no music is being played.
 Once Bluetooth devices are paired, there is no need to pair those
Tip
*
Bluetooth standard profiles indicate the purpose of
2
Please register this product on line at
For more information regarding
devices again. However, in the following case, you will need to
 The system remembers the last sound effect setting next time it
Bluetooth communication between devices.
After use
http://www.sony.com/productregistration
recycling of rechargeable batteries, call toll free
perform the pairing procedure again.
is turned on.
*
3
Codec: Audio signal compression and conversion format
Proper registration will enable us to send
Do any of the following.
The system is paired with 9 or more devices.
Distorted sound /
1-800-822-8837, or visit http://www.rbrc.org/
*
4
Subband Codec
you periodic updates about new products,
 Set the Bluetooth function of the Bluetooth device off. For
The system can be paired with up to 8 Bluetooth devices. If a
services and other important announcements.
*
5
Advanced Audio Coding
Caution:
new device is paired after 8 devices have been paired, the
details, refer to the operating instructions supplied with the
Humming or noise in the system output
Registering your product will also allow us
Do not handle damaged or leaking Lithium-Ion
Listening to Music by
device.
Microphone
to contact you in the unlikely event that the
device whose latest connection time is the oldest among the
batteries.
DC IN12.5V
BLUETOOTH
DC OUT ONLY
8 paired devices is replaced by the new one.
 Turn off the Bluetooth device.
product needs adjustment or modification.
Type:
Electret condenser
jack
STANDBY switch
connector (USB)
 More than one device can be paired with the system, but sound
 Turn off the system.
Wired Connection with a
Thank you.
Directional characteristic:
Precautions
will be heard from just one of those devices.
 Touch the system with the smartphone again to disconnect
Turn down the volume of the
Keep the system away from a TV.
Omni directional
(NFC compatible smartphones only).
Portable Audio Device,
Pattern B
connected device.
Effective frequency range:
WARNING
Notes when using with a mobile phone
50 Hz -10 kHz
Connecting with a paired
Function of Parts
Turning the System on
etc.
 For details on operation of your mobile phone when
Using Hands-free Calling
To reduce the risk of fire or electric shock, do not
General
receiving a telephone call while transmitting the sound
Bluetooth device
expose this apparatus to rain or moisture.
and off/Charging the
Input
AUDIO IN jack (ø 3.5 mm stereo mini jack)
using the Bluetooth connection, refer to the operating
BATTERY/CHARGE indicator
While Listening to Music
1
instructions supplied with the mobile phone.
Connect the device to the system.
DC OUT
USB jack Type A (for charging the battery
To reduce the risk of fire, do not cover the ventilation of the
Lights up, flashes or turns off depending on the status of
1
Turn on the system.
of a connected device) (5 V, Max.1.5 A)
system
apparatus with newspapers, tablecloths, curtains, etc. And do
On safety
If the connected device has an
Switch the Bluetooth connection to
the system.
The Bluetooth indicator (blue) flashes.
You can enjoy hands-free calling via Bluetooth connection
Power
DC 12.5 V (using the supplied AC adaptor
equalizer function, set it to off.
A2DP by operating the Bluetooth
not place lighted candles on the apparatus.
For details, see the following section, "Indications of BATTERY/
If the AUDIO IN indicator (amber) lights up, press the
with a Bluetooth mobile phone that has a music function and
connected to AC 100 V - 240 V, 50 Hz/60 Hz
Notes on the AC adaptor
device when HFP or HSP is set.
CHARGE indicator. "
This system can operate by AC adaptor or built-in lithium-ion
To reduce the risk of fire or electric shock, do not expose this
BLUETOOTH-PAIRING button.
supports the Bluetooth profile A2DP, and HFP or HSP.
power supply) or, using built-in lithium-ion
 When connecting or disconnecting the AC adaptor, turn off
battery (rechargeable). Charge the battery before using the
N-mark
battery
apparatus to dripping or splashing, and do not place objects
If your Bluetooth mobile phone supports both HFP and HSP,
the system beforehand. Otherwise, it may cause
system for the first time.
2
Set the Bluetooth function of the Bluetooth
Touch to make Bluetooth connection with an NFC
set to HFP.
filled with liquids, such as vases, on the apparatus.
Usage life of lithium-ion battery (using the Bluetooth
malfunction.
compatible smartphone.
1
device to on.
Connect the supplied AC adaptor.
connection)
 Use only the supplied AC adaptor. To avoid damaging the
Do not install the appliance in a confined space, such as a
(call) button
approx. 8 hours*
6
system, do not use any other AC adaptor.
The BATTERY/CHARGE indicator (amber) lights up when
bookcase or built-in cabinet.
Tip
Keep the system away from a
If you connect a device with a built-
Press to call or operate during a call.
Dimensions (including projecting parts and controls)
the battery is being charged, and turns off when charging
microwave oven, wireless LAN, etc.
in radio or tuner to this system,
 In the case of the last-connected Bluetooth device, the
VOLUME −/+ buttons
is complete. It takes approximately 4 hours to charge the
Approx. 341.0 mm × 115.0 mm × 58.5 mm
Do not expose the batteries (battery pack or batteries
system tries to re-establish Bluetooth connection with it if
broadcasts may not be received, or
(Stereo mini jack)
installed) to excessive heat such as sunshine, fire or the like for
Adjusts the volume.
battery.
(13
1
/
in × 4
5
/
in × 2
3
/
in) (w/h/d)
the device's Bluetooth function is on. When Bluetooth
2
8
8
sensitivity may be reduced. Locate
(Side stand closed)
a long time.
LOCK RELEASE switch
connection is established, the Bluetooth indicator (blue) on
the system farther away from the
Polarity of the plug
Approx. 341.0 mm × 115.0 mm ×72.0 mm
the system stays on.
Use for opening and closing the side stand.
device and check that you can listen
As the main plug of AC adaptor is used to disconnect the AC
(13
/
in × 4
/
in × 2
/
in) (w/h/d)
1
5
7
 Plug the AC adaptor into a nearby wall outlet (mains). In the
2
8
8
3
to the broadcasts satisfactorily.
adaptor from the mains, connect it to an easily accessible AC
Side stand
Select "SRS-BTX300" shown in the display of
(Side stand open)
case of a problem, unplug it from the wall outlet (mains)
outlet. Should you notice an abnormality in it, disconnect it
Open to use the system.
the Bluetooth device.
Mass
Approx.1,600 g (3 lb 8 oz)
immediately.
Bring this system and the
Charge the system by connecting
from the AC outlet immediately.
Illumination lamp
 Do not install the AC adaptor in a confined space, such as a
If necessary, select a Bluetooth profile that the system
including battery
Bluetooth device closer together.
the AC adaptor if the BATTERY/
Lights up in a variety of colors depending on the status of
The unit is not disconnected from the AC power source
bookcase or built-in cabinet.
supports from the following: A2DP, HSP or HFP. For details
Supplied accessories
Remove any obstacle between this
CHARGE indicator flashes in green
.
the system. For details, see the following section,
 To reduce the risk of fire or electric shock, do not expose the
on each profile, see "What is Bluetooth Wireless Technology?"
AC adaptor (1)
(mains) as long as it is connected to the wall outlet, even if the
system and the Bluetooth device.
"Indications of Illumination lamp. "
unit itself has been turned off.
AC adaptor to dripping or splashing, and do not place
The Bluetooth connection is established and the Bluetooth
Operating Instructions (this document) (2)
Connecting cord (not supplied)
objects filled with liquids, such as vases, on the AC adaptor.
Microphone
indicator (blue) on the system stays on.
Bluetooth ® Startup Guide (1)
The nameplate and important information concerning safety
Use during a call.
Warranty card (2)
are located on the bottom exterior of the main unit and on the
On placement
Notes
2
Turn on the system.
Carrying case (1)
DC IN 12.5V jack
surface of the AC adaptor.
 Do not set the speaker in an inclined position.
 This step may not be necessary for some devices.
Connects the supplied AC adaptor.
*
Time may vary, depending on the temperature or
 Do not leave the system in a location near heat sources, or
 If the system cannot connect to the Bluetooth device, delete
6
3
Turn on the connected device.
You are cautioned that any changes or modifications not
conditions of use.
in a place subject to direct sunlight, excessive dust,
AUDIO IN jack
"SRS-BTX300" from the Bluetooth device, then perform
expressly approved in this manual could void your authority
pairing again.
moisture, rain or mechanical shock.
Connects to the headphone jack of a portable audio device,
4
Press the AUDIO IN button on the system.
Design and specifications are subject to change without
to operate this equipment.
computer, etc., using a connecting cord (not supplied).
Operations may vary depending on the Bluetooth mobile
Bluetooth standby mode
notice.
On operation
phone. Refer also to the operating instructions supplied with
5
This equipment must not be co-located or operated in
BLUETOOTH STANDBY switch
Operate the connected device.
 Do not insert any small objects, etc., into the jacks or
your mobile phone.
When the Bluetooth standby mode is set to ON, the system can
conjunction with any other antenna or transmitter.
Turns on and off the Bluetooth standby mode.
Set the volume of the connected device to a moderate
ventilation hole on the rear of the system. The system may
be turned on and operated by a Bluetooth device.
1
Make the Bluetooth connection between the
short out or malfunction.
RESET button
level, then press the VOLUME –/+ buttons on the system.
This equipment complies with FCC/IC radiation exposure
system and the mobile phone.
Resets the system.
Pairing is not possible
limits set forth for an uncontrolled environment and meets
On cleaning
2
Press the / button.
Notes
the FCC radio frequency (RF) Exposure Guidelines in
DC OUT ONLY connector (USB)
For details on the Bluetooth connection procedure, see
 Do not use alcohol, benzine, or thinner to clean the cabinet.
 You cannot play music only by connecting to the system with
Supplement C to OET65 and RSS-102 of the IC radio frequency
Charges devices, such as your smartphone, etc. by
"How to Make Wireless Connection with Bluetooth
the connecting cord. Make sure to also press the AUDIO IN
(RF) Exposure rules.
connecting to the DC OUT ONLY connector (USB connector).
Devices. " When the Bluetooth connection is established,
Others
button.
This equipment has very low levels of RF energy that it
the Bluetooth indicator (blue) on the system stays on.
 Hands-free calling is not available while you are listening to
Bring this system and the Bluetooth
If the Bluetooth indicator (blue) is not
 If you have any questions or problems concerning this
SOUND button
deemed to comply without maximum permissive exposure
music from a device connecting to the system by the connected
device to within 1 m of each other.
flashing quickly, press and hold the
system that are not covered in this manual, please consult
Press to select a sound effect.
2
Start playback on the Bluetooth mobile
evaluation (MPE). But it is desirable that it should be installed
cord.
BLUETOOTH-PAIRING button on the
your nearest Sony dealer.
SOUND indicator
and operated keeping the radiator at least 20 cm or more
phone, then adjust the volume.
system until two beeps are heard.
Auto power off
Lights up, according to the sound effect setting.
away from person's body (excluding extremities: hands, wrists,
Set the volume of the Bluetooth mobile phone to a
The system automatically turns off after about 20 minutes
feet and ankles).
AUDIO IN button
moderate level, and press the VOLUME –/+ buttons on the
What is Bluetooth
when the hands-free is not being used (the system is not
Press to listen to sound from a device connected by a
system.
connected with a Bluetooth device via HFP/HSP), and when
Under Industry Canada regulations, this radio transmitter may
connecting cord (not supplied).
only operate using an antenna of a type and maximum (or
Wireless Technology?
To call
no device is being charged via the DC OUT ONLY connector,
AUDIO IN indicator (amber)
and when no music is being played.
lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the
Lights up in AUDIO IN mode.
Operate the Bluetooth mobile phone. Check that a dialing
Bluetooth wireless technology is a short-range wireless
tone is heard on the system and talk using the microphone. If
antenna type and its gain should be so chosen that the
BLUETOOTH-PAIRING button
technology that enables wireless data communication
no dialing tone is heard, press the
(call) button on the
equivalent isotropically radiated power (e.i.r.p.) is not more
Press to pair with a Bluetooth device.
Charging USB Devices,
between digital devices, such as a computer and digital
system for about 2 seconds to change the call device to the
than that necessary for successful communication.
Bluetooth indicator (blue)
camera. Bluetooth wireless technology operates within a range
system.
Notes
such as Smartphones, via
of about 10 m.
Lights up, flashes or turns off depending on the
This device complies with Industry Canada license-exempt
To receive a call
No voice / Low voice from recipient
communication status.
 The Bluetooth standby function will be turned off
RSS standard(s). Operation is subject to the following two
Connecting two devices as necessary is common, but some
automatically when the side stand is closed.
For details, see the following section, "Indications of the
a USB Connection to the
conditions: (1) this device may not cause interference, and (2)
devices can be connected to multiple devices at the same
When an incoming call arrives, the playback pauses and a ring
 If the system is being powered by battery, even if the
this device must accept any interference, including
time.
Bluetooth function. "
tone is heard from the system. Press the
(call) button on
system is turned off, battery power will continue to be
interference that may cause undesired operation of the
You do not need to use a cable for connection, nor is it
System
/ button
the system and talk using the microphone.
Tip
consumed if the BLUETOOTH STANDBY switch is set to ON.
necessary for the devices to face one another, such is the case
device.
Turns the system on/off.
with infrared technology. For example, you can use such a
 You can operate the system by battery instead of the AC adaptor
Tips
Pattern C
Important Safety Instructions
Check that both this system and
Select HFP or HSP Bluetooth
by charging the system before use.
You can charge your smartphone by connecting to the DC
device in a bag or pocket.
 If no ring tone is heard from the system when incoming call
Indications of BATTERY/CHARGE
OUT ONLY connector (USB) of the system. When using the
the connected device are turned
connection by operating the
Bluetooth standard is an international standard supported by
Connecting with a smartphone
arrives, stop playback and press the
(call) button to talk.
1) Read these instructions.
Notes
system by the built-in battery only, you can also charge a
on.
Bluetooth device.
thousands of companies all over the world, and employed by
indicator (built-in lithium-ion battery)
 You can use the hands-free calling when playback is completed
2) Keep these instructions.
 When the BATTERY/CHARGE indicator flashes as below,
by One touch (NFC)
smartphone from the battery of the system. Turn on the
 During a call, press the VOLUME –/+ buttons on the system to
various companies worldwide.
3) Heed all warnings.
charge the system. In these cases, you cannot charge
system in order to charge a USB device.
adjust the volume.
Status
BATTERY/CHARGE indicator
Communication system and
devices via the DC OUT ONLY connector.
4) Follow all instructions.
By just touching the system with an NFC compatible
System turned on
Lights up (green) (battery
Flashes (green) (Battery power is low).
Notes
compatible Bluetooth profiles of the
smartphone, the system is turned on automatically and then
5) Do not use this apparatus near water.
Flashes (amber), then turns off after turning on the system
operation only)
paired and connected with the smartphone.
 The sound is output from the left speaker only during a call.
6) Clean only with dry cloth.
system
(No battery power remaining).
 Use your smartphone at least 50 cm from the system. Noise may
Check that output of the Bluetooth
Turn up the volume of the system
Battery requires charging
Flashes (green)
1
7) Do not block any ventilation openings.
 When you switch the power source between AC adaptor
Download and install the app "NFC Easy
mobile phone is set for the system.
and the connected device.
result if the system and smartphone are too close.
Profile is standardisation of the function for each Bluetooth
Install in accordance with the manufacturer's instructions.
Charging battery
Lights up (amber)
and battery by connecting/disconnecting the AC adaptor,
Connect" on the smartphone.
To end a call
device specification. The system supports the following
the system stops sound output for a short while. This is not
8) Do not install near any heat sources such as radiators, heat
Charging complete
Off
Bluetooth version and profiles:
"NFC Easy Connect" is an original app by Sony for Android
a malfunction.
Press the
(call) button. If you were listening to music when
registers, stoves, or other apparatus (including amplifiers)
phones, and is available at Google Play Store.
Communication System:
 The maximum power output will be lower when the AC
Indications of Illumination lamp
the call arrived, it will be resumed when the call has finished.
that produce heat.
Search for "NFC Easy Connect" or scan the following two-
Bluetooth Specification version 3.0
adaptor is disconnected.
dimensional code to download and install the free app.
9) Do not defeat the safety purpose of the polarized or
Compatible Bluetooth Profiles:
After use
 In an extremely cold or hot environment, note the following
Communication fees are required to download the app.
grounding-type plug. A polarized plug has two blades
A2DP (Advanced Audio Distribution Profile): Transmitting
Status
Illumination lamp
points.
Do any of the following.
or receiving audio content of high-quality.
The app may not be downloadable in some country/
When operating by the AC adaptor, charging may complete
 Set the Bluetooth function of the Bluetooth device off. For
with one wider than the other. A grounding type plug has
AUDIO IN mode
Lights up (white)
regions.
AVRCP (Audio Video Remote Control Profile): Controlling
too quickly, or may not be possible.
details, refer to the operating instructions supplied with the
two blades and a third grounding prong. The wide blade
Searching for a device
Lights up (white)
the volume.
When operating on battery only, the system may stop after
Tip
device.
or the third prong are provided for your safety. If the
HSP (Headset Profile): Talking on the phone/Operating the
the BATTERY/CHARGE indicator flashes (green) three times.
Connecting to Bluetooth
Lights up (blue)
 Turn off the Bluetooth device.
provided plug does not fit into your outlet, consult an
 For some smartphones, One touch connection may be
phone.
device
 Charge the battery at least twice a year.
 Turn off the system.
available without downloading the app "NFC Easy Connect. "
electrician for replacement of the obsolete outlet.
HFP (Hands-free Profile): Talking on the phone/Operating
One touch connection (NFC) is
Pressing VOLUME−/+
Flashes once (white)
To reset the system
In that case, the operation and specifications may be
 Touch the system with the smartphone again to disconnect
the phone by hands-free.
10) Protect the power cord from being walked on or pinched
(NFC compatible smartphones only).
buttons
different from the description here. For details, refer to the
not possible
Press the RESET button on the rear of the system with a
particularly at plugs, convenience receptacles, and the
Maximum communication range
operating instructions supplied with the smartphone.
Unit button functions during a call
When the volume hits the
Flashes three times (white)
pointed object if the buttons on the system do not function.
point where they exit from the apparatus.
maximum or minimum
By the two-dimensional code:
Use Bluetooth devices within 10 m (line of sight) of the system.
USB cable
11) Only use attachments/accessories specified by the
Available functions may vary depending on the Bluetooth
Use a two-dimensional code reader app.
Maximum communication range may shorten under the
mobile phone, or the profiles supported by the Bluetooth
(not supplied)
manufacturer.
following conditions.
Tip
How to Make Wireless
Note
Keep the smartphone close to the
If the smartphone is in a case,
mobile phone. Refer to the operating instructions supplied
12) Use only with the cart, stand, tripod, bracket, or table
There is an obstacle such as a person, metal, or wall
 To turn the illumination on/off, hold down the
 This function is not for data communication by USB cable.
system until the smartphone
remove it.
with the Bluetooth mobile phone.
specified by the manufacturer, or sold with the apparatus.
between the system and Bluetooth device.
BLUETOOTH-PAIRING button, then press and hold the /
vibrates. If you fail, move the
Connection with
Status
(call) button
When a cart is used, use caution when moving the
A wireless LAN device is in use near the system.
button.
smartphone slightly on the N
marked part of the system.
cart/apparatus combination to avoid injury from tip-over.
A microwave oven is in use near the system.
Standby
 Press once to start voice dial (voice dial
Disposing of the System
Indications of the Bluetooth function
Bluetooth Devices
A device that generates electromagnetic radiation is in
compatible mobile phones only).
use near the system.
 Press for about 2 seconds to redial the phone
Status
Bluetooth indicator (blue)
For environment protection, remove the built-in lithium-ion
You can enjoy music and hands-free calling with the system
number that is dialed last time.
Interference from other devices
Compatible smartphones
Check that the NFC function of the
NFC receiving sensitivity depends on
Pairing with a device
Flashes quickly
battery pack from the system.
wirelessly by using your device's Bluetooth function.
 Smartphones with the NFC function built-in
Outgoing
 Press once to cancel outgoing call.
Before removing the battery, drain the battery by removing
smartphone is set to on.
the device. If you fail to connect with
Because Bluetooth devices and wireless LAN (IEEE802.11b/g)
Choose one of the following three connection methods, best
Searching for a device
Flashes
(OS: Android 2.3.3 or later, excluding Android 3.x)
call
 Press for about 2 seconds to change call
a smartphone by One touch several
the AC adaptor and using the system only with the battery.
use the same frequency, microwave interference may occur
suited for the Bluetooth device. For details on how to operate
Connected to a device
Lights up
device between the system and mobile
times, connect to the system by on-
13) Unplug this apparatus during lightning storms or when
and resulting in communication speed deterioration, noise, or
your device, refer to the operating instructions supplied with
About NFC
phone.
Take out the lithium-ion battery for recycling.
screen operation.
unused for long periods of time.
invalid connection if the system is used near a wireless LAN
Bluetooth standby mode
Flashes slowly
the device.
Do not open the cabinet other than when disposing of
14) Refer all servicing to qualified service personnel. Servicing
device. In such a case, perform the following.
NFC (Near Field Communication) is a technology enabling
Incoming
 Press once to answer call.
Pairing with a Bluetooth device:
the system.
short-range wireless communication between various
call
is required when the apparatus has been damaged in any
Use the system at least 10 m away from the wireless LAN
 Press for about 2 seconds to reject call.
see
Pattern A
device.
devices, such as mobile phones and IC tags. Thanks to the
way, such as power-supply cord or plug is damaged, liquid
Check that the "NFC Easy Connect"
During
 Press once to finish call.
1
Opening the Side Stand
Turn off the system and remove the AC
If the system is used within 10 m of a wireless LAN device,
NFC function, data communication can be achieved easily
Bluetooth devices need to be "paired" with each other
call
app is displayed on the
has been spilled or objects have fallen into the apparatus,
 Press for about 2 seconds to change call
turn off the wireless LAN device.
just by touching the relevant symbol or designated
adaptor.
beforehand.
smartphone.
the apparatus has been exposed to rain or moisture, does
device between the system and mobile
location on NFC compatible devices.
Interference to other devices
Open the side stand and operate the buttons inside. The side
Connecting with a paired device:
phone.
not operate normally, or has been dropped.
2
Detach the cover of the rear of the system to
stand also functions as a support while using the system.
2
Start the app "NFC Easy Connect" on the
see
Pattern B
WARNING
Microwaves emitting from a Bluetooth device may affect the
remove the battery pack.
Slide the LOCK RELEASE switch in the direction of the arrow
smartphone.
Using Hands-free calling with another
operation of electronic medical devices. Turn off the system
(illustration) to open the side stand.
To listen to music with a Bluetooth device that has been
 Remove the two rubber covers at the center of the
 Battery may explode if mistreated. Do not recharge,
and other Bluetooth devices in the following locations, as it
Make sure that the application screen is displayed.
paired, see this pattern.
Bluetooth mobile phone while
rear of the system.
disassemble or dispose of in fire.
may cause an accident.
3
 Remove the two screws.
Touch the system with the smartphone.
 Dispose of used battery promptly, according to local
One touch connection with a smartphone (NFC):
listening to music
where inflammable gas is present, in a hospital, train,
 Remove the cover.
environmental laws and guidelines in force. Keep away from
airplane, or a gas station
see
Keep touching the smartphone on the N marked part of
Pattern C
 Remove the connector plug from the system.
children.
the system until the smartphone vibrates.
This system is compatible with Multipoint technology, which
near automatic doors or a fire alarm
 Remove the battery.
allows you to enjoy hands-free calling while listening to music
Using an NFC compatible smartphone, you can establish a
For the State of California, USA only
Smartphone vibrates
Notes
Bluetooth connection by just touching the system with it.
from a Bluetooth-compatible music player.
(system recognized)
Perchlorate Material - special handling may apply, See
 To be able to use the Bluetooth function, the Bluetooth
www.dtsc.ca.gov/hazardouswaste/perchlorate
Check the following before operating the system.
device to be connected requires the same profile as the
 Both the system and the device are placed within 1 m of
Perchlorate Material : Lithium battery contains perchlorate.
system's.
each other.
Note also that even if the same profile exists, devices may
On Copyrights and Licenses
 The system is connected to the AC adaptor, or the battery is
vary in function depending on their specifications.
The Bluetooth® word mark and logos are owned by the
sufficiently charged.
 Due to the characteristic of Bluetooth wireless technology,
Bluetooth SIG, Inc. and any use of such marks by Sony
 The operating instructions supplied with the device are at
the sound played on the system is slightly delayed from the
Corporation is under license.
hand.
sound played on the Bluetooth device during talking on the
The N Mark is a trademark or registered trademark of NFC
telephone or listening to the music.
Pattern A
Forum, Inc. in the United States and in other countries.
 This system supports security capabilities that comply with
Android is a trademark of Google Inc.
the Bluetooth standard to provide a secure connection
Pairing and connecting with a
iPhone is a trademark of Apple Inc., registered in the U.S. and
when the Bluetooth wireless technology is used, but
other countries.
Bluetooth device
security may not be enough depending on the setting. Be
Other trademarks and trade names are those of their
To close the side stand
careful when communicating using Bluetooth wireless
Note
respective owners.
technology.
 Be careful not to damage the code cover with metallic tweezers,
1
Turn on the system.
Close the side stand when you carry the system.
 We do not take any responsibility for the leakage of
etc. when you remove the battery pack from the system.
NOTE
Slide the LOCK RELEASE switch in the direction shown by the
The Bluetooth indicator (blue) flashes.
information during Bluetooth communication.
arrow above, then close the side stand by hand.
If the AUDIO IN indicator (amber) lights up, press the
 A device featuring the Bluetooth function is required to
This equipment has been tested and found to comply with the
The system automatically turns off when the side stand is
BLUETOOTH-PAIRING button.
conform to the Bluetooth standard specified by Bluetooth
limits for a Class B digital device, pursuant to Part 15 of the
closed.
SIG, and be authenticated. Even if the connected device
2
FCC Rules. These limits are designed to provide reasonable
Set the Bluetooth function of the Bluetooth
Lights up
protection against harmful interference in a residential
conforms to the above mentioned Bluetooth standard,
device to on.
some devices may not be connected or work correctly,
installation. This equipment generates, uses and can radiate
 One touch connection (NFC) cannot be used in this
depending on the features or specifications of the device.
For details, refer to the operating instructions supplied
radio frequency energy and, if not installed and used in
procedure.
 Noise or sound skips may occur depending on the Bluetooth
with the device.
accordance with the instructions, may cause harmful
 Operations may vary depending on the Bluetooth device.
Follow the on-screen instructions to establish the
device connected with the system, the communication
interference to radio communications. However, there is no
3
Press and hold the BLUETOOTH-PAIRING
connection.
This type of Bluetooth connection may not be established
environment or the usage environment.
guarantee that interference will not occur in a particular
depending on the combination of the Bluetooth devices.
button on the system until two beeps are
When the Bluetooth connection is established, the
installation. If this equipment does cause harmful interference
Bluetooth indicator (blue) stays on.
Refer also to the operating instructions supplied with your
heard.
to radio or television reception, which can be determined by
Bluetooth devices.
turning the equipment off and on, the user is encouraged to
The Bluetooth indicator (blue) begins to flash quickly and
try to correct the interference by one or more of the following
pairing mode is entered.
measures:
— Reorient or relocate the receiving antenna.

   Related Manuals for Sony SRS-BTX300

   Summary of Contents for Sony SRS-BTX300

  • Page 1

    8) Do not install near any heat sources such as radiators, heat Charging complete Bluetooth version and profiles: “NFC Easy Connect” is an original app by Sony for Android a malfunction. Press the (call) button. If you were listening to music when registers, stoves, or other apparatus (including amplifiers) phones, and is available at Google Play Store.

  • Page 2

     No coloque los altavoces en posición inclinada. No abra el gabinete excepto para desechar el sistema. Si no aparece “SRS-BTX300” en la pantalla del dispositivo, alimentación de CA (toma de corriente) mientras esté  No deje el sistema en una ubicación cercana a fuentes de Escuchar música...

This manual also for:

Srs-btx300/blk, Srs-btx300/wht

Comments to this Manuals

Symbols: 0
Latest comments: