Creating Color/Grayscale Or Black And White Images Based On The Content Of Your Documents - Kodak i780 Manual

Creating color/grayscale
or black and white
images based on the
content of your
documents
A-61504 October 2007
In this example, let's assume you want to configure a scan session that
has a mix of color and black and white documents with information on
both sides. In addition, you want the scanner to detect whether the
page is color or not, and then output either a color or a black and white
image based on that.
1. Select a Setting Shortcut from the main Kodak Scanner window
that closely describes your desired output.
2. Select Settings to display the Image Settings window.
3. Select the Advanced Image Setup icon on the Image Settings
window to display the Advanced tab.
4. Select Input document is: Two Sided.
5. Select Images per side: One - based on document content.
NOTE: The Images to Configure area will now be displayed on the
Advanced tab and contain a color image item and a black
and white image item. The Content Settings tab will also be
displayed.
6. If you want a grayscale image instead of a color image, when
enough color is detected in the document:
• make sure Color (24-bit) is selected
• select Change to display a list of options
• select Grayscale
7. Go to the Content Settings tab.
8. Select a Sensitivity option.
9. Select Done to return to the Image Settings window.
NOTE: You will notice that the Side option now has two entries:
Both: Color (24-bit) and Both: Black and White (1-bit).
10. Select Sides: Both: Color (24-bit).
Make any other adjustments to the color image settings on the rest
of the tabs on the Image Settings window.
11. Select Sides: Both: Black and White (1-bit).
Make any other adjustments to the black and white image settings
on the rest of the tabs on the Image Settings window.
12. When finished, select Home to return to the main Kodak Scanner
window and then select Save to save your selections to the
shortcut.
3-23