Fixture Cleaning - American DJ Utopia 250S User Instructions

Utopia 250S™

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Utopia 250S™
Trouble Shooting: Listed below are a few common problems that you
may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120V wall
outlet.
2. Be sure the external fuse has not blown. The fuse is located on the
bottom panel of the unit.
3. Remove the lamp cover and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during shipping
be sure the lamp is push in to its socket all the way.
4. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may not
activate the unit.
2. Be sure the SENSITIVITY KNOB (5) is not set to the minimum
position
American DJ - www.americandj.com - Utopia 250S™ Instruction Manual Page 13
© ®
Cleaning
Trouble Shooting
Utopia 250S™
This chart below details the DMX traits. The individual trait can only be
accessed an universal DMX controller.
DMX CHANNEL
1 2
PAN TILT
255 145˚ 255 90˚
128 73˚ 128 45˚
0˚ 0 0˚
0
This chart details the gobo pattern as well
as the gobo wheel placement.
Utopia 250S™
This chart details the Master/Slave dip switch setting for Master/Slave
configuration. Use this configuration only when you will be using your
fixtures in a Master/Slave configuration. Be sure the number 2 function
switch is set to the on position for sound-active operation.
ON
ON
1 2
Master - Head 1
1 2 3 4
ON
Function Switch
1 2
American DJ - www.americandj.com - Utopia 250S™ Instruction Manual Page 14
© ®
DMX Traits
4
3
COLOR/GOBO STROBE
White/Lg Spot 248-255 Strobe 1fps 255
Strobe 8fps 247
Strobe 2fps 208
Fast Rotation 207
Slow Rotation 160
Gobo 17/Ylw-Lt Blue 152-159
Strobe Step Up
Gobo 16/Purple 144-151
Gobo 15/Blue 136-143
Gobo 14/Lt Blue 128-135
Gobo 13/Green 120-127
Gobo 12/Yellow 112-119
Gobo 11/Red 104-111
Strobe 7fps 129
Gobo 10/White 96-103
Strobe 7fps 128
Gobo 9/4-Colors 88-95
Gobo 8/Purple-Wht 80-87
Gobo 7/Red-Green 72-79
Gobo 6/Purple 64-71
Gobo 5/Blue 56-63
Gobo 4/Lt Blue 48-55 Strobe Step Down
Gobo 3/Green 40-47
Gobo 2/Yellow 32-39
Gobo 1/Red 24-31
Blackout 16-23
Lrg Spot/White 08-15
Blackout 01-07 Strobe 1fps 01
Lamp Off 00 Stop 00
Master/Slave Settings
ON
3 4 5 6 7 8 9 1 2 3 4 5
Head 2
ON
3 4 5 6 7 8 9 1 2 3 4 5
Head 3 Head 4
6 7 8 9
6 7 8 9