Midi Setting - American DJ TP-DMX24F User Instructions

MIDI SETTING AND RUNNING

MIDI SETTING

Touch and hold (FIG.1.) CHASE 9, CHASE 10, CHASE 11,CHASE 12, while power is being turned
on.
CHASE 1, CHASE 2, CHASE 3 LEDs blink rapidly and (FIG14.) LCD DIGITAL DISPLAY READS
A A A A A A this means console is in MIDI mode.
1. CHASE 1 MIDI SEND / CHASE 2 MIDI RECEIVE
Touch CHASE 1 or CHASE 2 the LEDs blinks and go out. MIDI channel is defined, as CHANNEL
1-16,CHANNEL 17-24 is not assigned. Touch any CHANNEL 1-16, LED lights then touch (FIG 7.)
AUDIO PERCENT TRAITS CHASE, selected CHANNEL is memorized. Touch (FIG 7.) AUDIO
PERCENT TRAITS CHASE once more to exit from MIDI and to return to MANUAL mode.
2. CHASE 3 MIDI MEMORY DUMP.
Touch CHASE 3, LED lights, and other turn off. touch once more to transmit memory information,
when the LED blinks, transmission is done. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE the
LEDs of CHASE 1, CHASE 2, CHASE 3 light. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE
once more to exit from MIDI and to return to MANUAL mode.
MIDI RUNNING
1. NOTE ON / NOTE OFF
To receive note on / note off information touch (FIG 2.) CHANNEL 1-24 note on / note off informa-
tion is sent with maximum speed.
Touch KEY to send PROGRAM CHANGE infor mation or to receive PROGRAM CHANGE informa-
tion and to run.
NOTE NUMBER
88-111
NOTE CHNG NUMBER
PROGRAM CHNG NUMBER
0 - 23
24 - 47
96
97
TP-DMX24F™ Instructions page 8
Cont.
TURN ON CHASE 1-24
TURN OFF CHASE 1-24
CHANNEL
1-24
CHANNEL
FUNCTION
SINGLE CHASE
MIX CHANNEL