13-9) When Ice Water Valve Does Not Operate (Option) - Samsung RB215BSSB Service Manual

13-9) When Ice Water Valve does not operate (Option)

Pre-Check
1. While disassembling,make sure to cut off water since the ice water valve is directly
connected with water.
2. Make sure to avoid the electric shock while disassembling because one end of wire is
applied with power.
3. Check the operation of the ice water valve only after the ice maker test switch is pressed.
(F-Room Ice Maker)
- Reference
* Load terminal
check-up method
ICE WATER VALVE
OPERATION CHECK
Is the
confirming sound of
the valve operation heard when
Ice Maker Test S/W
pushed?
YES
Does Main
PCB MICOM #31
have high (+5V)output?
YES
Does Main PCB IC70 #18
have low (0V)output?
YES
Is the contact
point of main PCB RELAY
RY71 normal?
YES
Main PCB Normal
- Check other parts
① Wire between ice water value
and main PCB
② Water Value defect or
Connection Connector contact
defect
③ Check Connection Hose defect
NO
NO
NO
NO
69
Normal (check the
ice water valve hose)
Check short-out
Soldering / PCB change
Soldering short
check/PCB change
Soldering short
check/PCB change