Door Reversal - Electrolux ENN 28600 User Manual

Instructions for totally built-in
appliances

Door reversal

The appliance is supplied with the right
or left door opening. To change the opening
direction of the door proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Remove the hinge cover (A). Unscrew the pins
(B) and the spacers (C) and refit them on the
middle hinge of the opposite side. Snap the hinge
cover (A).
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side
Recess dimensions
Height (1)
Depth (2)
Width (3)
To ensure adequate ventilation, allow the clearances
shown in figure.
Furthermore, it is necessary that the cabinet has a
ventilation recess with the following dimensions:
depth 50 mm
width 540 mm
16
1780 mm
550 mm
560 mm