Rbsu Options - HP ML570 - ProLiant - G2 Manual
Server hot-add memory
Hide thumbs
Also See for ML570 - ProLiant - G2:
- Setup and installation manual (288 pages) ,
- Quickspecs (51 pages) ,
- Tuning manual (51 pages)
Table of Contents
Advertisement
RBSU Options
The board insertion mode is also configurable in RBSU. The menu for selecting the
board insertion mode in RBSU (refer to Figures 2 through 5) can be accessed by
selecting the System Options menu, then the Hot-Plug Board Insertion Mode
menu.
The options under Hot-Plug Board Insertion Mode are Hot-Mirror and Hot-Add.
The mode currently selected is highlighted.
NOTE: The default board insertion mode is Hot-Mirror.
Figure 2: RBSU Hot-Plug Board Insertion Mode settings
The following sequence of screens provide details for selecting Hot-Add mode.
NOTE: The screens in this document show the ProLiant ML570 G2 server for consistency, but
the same screens apply for the ProLiant DL580 G2 server.
HP ProLiant DL580 Generation 2 and HP ProLiant ML570 Generation 2 Server Hot-Add Memory
11
Advertisement
Table of Contents
