Power Supply & Installation; Power Supply; Power Management; Installation - Coby DVD978 Instruction Manual

Connections
Power Supply & Installation

Power Supply

Plug the power cord of this unit into an AC 110-120V 60Hz wall outlet,
only. Make all video, speaker, and audio connections before con-
necting the power.
Do not connect the power plug to a power outlet other than that
which is indicated here and on the rating label as this may result
in the risk of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may
cause electric shock.

Power Management

If the unit will not be in use for a long period of time, turn the unit off
and unplug it from the AC power supply, and remove the batteries from
the remote control.

Installation

 Install the unit on a level, flat and firm surface with good ventilation.
Never block the cabinet vents; blocked vents will cause the unit to
overheat and malfunction.
 Do not install the unit in a place exposed to heating sources or direct
sunlight.
 Do not install the unit in a place exposed to moisture or rain.
Page 24 Coby Electronics Corporation