Sony STR-DA5800ES Operating Instructions Manual page 128

Program the sequence of the
operation
1
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing RM SET UP.
The RM SET UP button flashes and one
of the input buttons lights up (as the
factory default setting, the BD button
lights).
2
Press the input button for the
equipment for which you want
to program the sequence of
operation(s).
3
Press the buttons you want to
program in the same sequence
as you want the operation(s) to
be performed.
You can program particular operations
using the following buttons.
Press
The input
button for more
than 1 second
MACRO 1 or
MACRO 2
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3 when you
want to program operations for
other equipment.
5
Press RM SET UP to finish the
programming process.
128
GB
Operations to be
programmed
Switches inputs.
Make a one-second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.
To cancel programming
Not pressing any button for 60 seconds cancels
the settings.
The previous command remains valid.
Starting macro play
1
Press AMP.
The AMP button lights up, and then turns
off.
2
Press MACRO 1 or MACRO 2 to
start the macro.
The macro starts and executes the
commands in the order you assigned
them. While the commands are being
sent, the AMP button flashes and the RM
SET UP button lights up. When the
commands have been sent, the RM SET
UP and AMP buttons turn off.
To erase a programmed macro
1
Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes.
2
Press RM SET UP.
Settings stored as macro are cleared.