Specifications; Troubleshooting - Samsung UN19F4000AFXZA User Manual

4000 series; 5000 series

Hide thumbs

page of 2

/ 2
Bookmarks

Program Rating Lock

Return to Default: This option sets each Size, Font Style, Foreground

Color, Background Color, Foreground Opacity and Background

The Program Rating Lock feature automatically locks out programs

Opacity to its default.

that are deemed inappropriate for children. The user must enter a PIN

✎

Digital Caption Options are available only when Default and

(personal identification number) before any of the Program Rating Lock

Service1~Service6 can be selected in Caption Mode.

restrictions are set up or changed.

✎

The Foreground and Background cannot be set to have the same

✎

Program Rating Lock is not available in HDMI or Component

color.

mode.

Melody

✎

The default PIN number of a new TV set is "0-0-0-0".

■ Program Rating Lock: You can block rated TV Programs.

Set so that a melody plays when the TV is turned on or off.

■ TV Parental Guidelines: You can block TV programs depending on

✎

The Melody does not play.

their rating. This function allows you to control what your children are

When no sound is output from the TV because the

watching.

has been pressed.

■ MPAA Rating: You can block movies depending on their MPAA

When no sound is output from the TV because the volume has

rating. The Motion Picture Association of America (MPAA) has

been reduced to minimum with the

VOL –

implemented a rating system that provides parents or guardians with

When the TV is turned off by Sleep Timer function.

advanced information on which films are appropriate for children.

■ Canadian English: You can block TV programs depending on their

Eco Solution

Anglophone Canadian.

■ Energy Saving: This adjust the brightness of the TV in order to

■ Canadian French: You can block TV programs depending on their

reduce power consumption. If you select Picture Off, the screen is

French Canadian rating.

turned off, but the sound remains on. Press any button except volume

■ Downloadable U.S. Rating: Parental restriction information can be

button to turn on the screen.

used while watching DTV channels.

■ Eco Sensor

: To enhance your power savings; the

for 5 series

■ Change PIN: The Change PIN screen will appear. Choose any 4 digits

picture settings will automatically adapt to the light in the room.

for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits

✎

If you adjust the Backlight, the Eco Sensor will be set to Off.

in Confirm New PIN. When the Change PIN screen disappears, press

Min. Backlight: When Eco Sensor is On, the minimum screen

the OK button. The TV has memorized your new PIN.

brightness can be adjusted manually.

✎

If you forget the PIN, press the remote-control buttons in the

✎

If Eco Sensor is On, the display brightness may change (become

following sequence, which resets the pin to "0-0-0-0" :

POWER

slightly darker in most cases) depending on the surrounding light

(off) →

MUTE

→ 8 → 2 → 4 →

POWER

(on)

intensity.

Caption

■ No Signal Power Off : Sets how quickly the TV switches to standby

mode, if no picture is being received.

(On-Screen Text Messages)

✎

Disabled when the PC is in power saving mode.

■ Caption: You can switch the caption function on or off. If captions are

■ Auto Power Off: The TV will be automatically turned off when no user

not available, they will not be displayed on the screen.

operation is received for 4 hours.

✎

The Caption feature does not work in Component or HDMI

mode.

Auto Protection Time

■ Caption Mode: You can select the desired caption mode.

If the screen remains idle with a still image for a certain period of

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

time defined by the user, the screen saver is activated to prevent the

Analog Caption function operates in either analog TV channel mode

formation of ghost images on the screen.

or when a signal is supplied from an external device to the TV.

(Depending on the broadcasting signal, the Analog Caption function

Support Menu

may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital

channels only) The Digital Captions function works with digital

Self Diagnosis

channels.

✎

Service1~6 may not be available in digital caption mode

■ Picture Test: Use to check for picture problems. If the problem

depending on the broadcast.

continues to occur, check the color pattern.

■ Digital Caption Options: (digital channels only)

■ Sound Test: Use the built-in melody sound to check for sound

Size: Options include Default, Small, Standard and Large. The default

problems.

is Standard.

■ Signal Strength: (digital channels only) An HD channel's reception

Font Style: Options include Default and Styles 0 to 7. The default is

quality is either perfect or the channels are unavailable. Adjust your

Style 0.

antenna to increase signal strength.

Foreground Color: Options include Default, White, Black, Red,

■ Reset: Reset all settings to the factory defaults.

Green, Blue, Yellow, Magenta and Cyan.

✎

The PIN input screen appears before the setup screen.

You can change the color of the letter. The default is White.

✎

Enter your 4-digit PIN. Change the PIN using the Change PIN

Background Color: Options include Default, White, Black, Red,

option.

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the caption. The default is Black.

Software Upgrade

Foreground Opacity: This adjusts the opacity of text. Options include

Software Upgrade can be performed by downloading the latest

Default, Transparent, Translucent, Solid and Flashing.

firmware from samsung.com to a USB memory device.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent, Solid

HD Connection Guide

and Flashing.

Refer to this information when connecting external devices to the TV.

- 9 -

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.

com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem

Possible Solution

Flickering and Dimming

If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient features

like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn these features

off or on.

y Energy Saving :

→ Setup → Eco Solution → Energy Saving

y Eco Sensor :

→ Setup → Eco Solution → Eco Sensor

for 5 series

Component Connections /

If you find that the color on your Samsung television's screen is not correct or black and White, first run a Self Diagnosis on

the TV to make sure there are no device issues.

Screen Color

y Self Diagnosis :

→ Support → Self Diagnosis → Picture Test

If the test is ok, try making sure:

y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have used the

AV Out jack on your video source.

y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,

and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the

blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness

If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you

should check before calling for a repair.

y Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go in to "Picture" on user Menu then try

adjusting options mentioned above.

Unwanted Powering off

If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No

Signal Power Off feature.

First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with the TV

still on but, turns it off after a certain period of time so as not to waste energy.

→ Setup → Time → Sleep Timer

y Sleep Timer :

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

y No Signal Power Off :

→ Setup → Eco Solution → No Signal Power Off

y Auto Power Off :

→ Setup → Eco Solution → Auto Power Off

Trouble Powering On

Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote and it

will blink about 5 times before turning on.

If you find that you are having trouble powering on your Samsung television, there are a number of things to check before

making a call to the service department.

y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the

power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the

mouse. Then try turning your TV on.

If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have

a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the

signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the

screen displays the guide or info data, the problem is caused by the box.

Stand Assembly

If you have any trouble to assemble the stand though you refer to "Install the Stand" mentioned at separate guide.

Cannot find channel

Re-run plug and play.

Poor picture

First, perform the Picture Test and to see if your TV is properly displaying the test image.

Go to

- Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as it

If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high

did in the store.

definition) picture quality.

Cable/Satellite subscribers: Try HD channels from the channel line up.

Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎

Many HD channels are up scaled from SD(Standard Definition) contents.

y Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock error,

y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

small block, dots, pixelization.

movies.

y A weak signal can cause picture distortion. This is not a TV problem.

y Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing.

If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause color problems or a blank screen.

There is poor color or brightness.

y Adjust the Picture options in the TV menu. (Go to Picture Mode / Color / Brightness / Sharpness)

y Adjust the Energy Saving option in the TV menu. (Go to

- Setup - Eco Solution - Energy Saving)

y Try resetting the picture to view the default picture setting. (Go to

- Picture - Picture Reset)

There is a dotted line on the edge of the

y If the picture size is set to Screen Fit, change it to 16:9.

screen.

y Change the cable/satellite box resolution.

The picture is black and white.

If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.

- 13 -

UF4000_5000_19-29_ZC_ENG-US.indd 2

POWER

Contact Samsung

If a USB device connected to the TV is not recognized, the list of

files on the device is corrupted, or a file in the list is not played,

View this information when your TV does not work properly or when you

connect the USB device to a PC, format the device, and check

want to upgrade the software. You can find information regarding our call

the connection.

centers and how to download products and software.

If a file you deleted from the PC is still found when you run Media

Play, use the "Empty the Recycle Bin" function on the PC to

Media Play

permanently delete the file.

Photos only supports sequential jpeg format.

The scene search and thumbnail functions are not supported in

Enjoy photos, music and/or movie files saved on a

the Videos.

USB Mass Storage Class (MSC) device.

If the number of files and folders saved on a USB storage device is

MEDIA.P

approximately over 4000, the files and folders may not appear and

MUTE

button

some folders may not be opened.

The maximum displayed number of files, including sub folders, in

one folder of USB storage device is 2000.

Connecting a USB Device

button.

The media may not be playing smoothly when using the device

1. Turn on your TV.

lower than USB 2.0.

2. Connect a USB device containing photo, music and/or movie files to

Videos

the

USB

jack on the side of the TV.

3. When USB is connected to the TV, you can select Media Play (USB)

1. Press the ◄/► buttons to select Videos, then press the ENTERE

in Applications menu.

button in the Media Play menu.

2. Press the ◄/►/▲/▼ buttons to select the desired video in the file

❑ Using the Media Play Menu

list.

1. Press the

button. Press the ▲ or ▼ button to select

3. Press the ENTERE button or � (Play) button.

Applications, then press the ENTERE button.

The selected file is displayed on the top with its playing time.

2. Press the ▲ or ▼ button to select Media Play (USB), then press the

If video time information is unknown, playing time and the progress

ENTERE button.

bar are not displayed.

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,

During video playback, you can search using the ◄/► buttons.

Settings), then press the ENTERE button.

✎

In this mode, you can play movie clips contained in a game, but you

✎

It might not work properly with unlicensed multimedia files.

cannot play the game itself.

✎

Need-to-Know List before using Media Play (USB)

y Supported Subtitle Formats

Supported file systems are FAT and NTFS.

External

Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

Media Play only supports USB Mass Storage Class (MSC)

MPEG-4 timed text

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV's USB

port. USB HDD is not supported.

Before connecting your device to the TV, please back up your files

to prevent them from damage or loss of data. SAMSUNG is not

SubStation Alpha

responsible for any data file damage or data loss.

Advanced SubStation Alpha

A USB device that requires high power (more than 0.5A) may not

be supported.

Internal

Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to

display on the screen.

The maximum supported JPEG resolution is 15360 x 8640 pixels.

SubStation Alpha

If a file is corrupted or the TV does not support the file type, the

Advanced SubStation Alpha

"Not Supported File Format" message appears.

The TV cannot play MP3 files with DRM that have been

MPEG-4 Timed text

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

y Supported Video Formats

and management of digital content in an integrated and

File

comprehensive way, including protecting the rights and interests

Container Video Codec

Extension

of content providers, preventing illegal copying of contents, and

managing billings and settlements.

PTP device is not supported.

*.mp4

MP4

If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

If the TV has no input during the time set in Auto Protection

Time, the Screensaver will run.

"*.avi

"AVI

The power-saving mode of some external hard disk drives may be

*.mkv"

MKV"

released automatically when your connect them to the TV.

If you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the files on the device.

"*.asf

ASF

*.wmv"

- 10 -

When changing channels, the picture

y If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It may take

freezes or is distorted or delayed.

up to 20 minutes)

y Set the output resolution of the cable box to 1080i or 720p.

Sound Problem

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

(Go to

- Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too low at

Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

maximum volume.

The picture is good but there is no sound.

y If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's

audio option to HDMI when you have a HDMI connected to your TV).

y Reboot the connected device by reconnecting the device's power cable.

The speakers are making an inappropriate

y Check the cable connections. Make sure a video cable is not connected to an audio input.

noise.

y For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

y Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on.

y Make sure the AC power cord is securely plugged into the wall outlet and the TV.

y Make sure the wall outlet is working.

y Try pressing the

POWER

button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to 'Remote control does not work' below.

The TV turns off automatically.

y Ensure the Sleep Timer is set to Off in the Time menu.

y If your PC is connected to the TV, check your PC power settings.

y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

y When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there

is no signal.

There is no picture/video.

y Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

y Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For

example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.

y Make sure your connected devices are powered on.

y Be sure to select the TV's correct source by pressing the

y Reboot the connected device by reconnecting the device's power cable.

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

y Make sure the coaxial cable is connected securely.

y Please try Auto Program to add available channels to the channel list.

go to

- Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the

menu. There are 3 options. (STD, HRC and IRC)

y Verify the antenna is positioned correctly.

No Caption on digital channels.

y Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.

y Some channels may not have caption data.

The picture is distorted: macroblock, error,

y Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action

small block, dots, pixelization.

movies.

y A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has

buzzing noise from the TV speakers with

a grounding issue. Replace the Component video cables with an HDMI connection.

Component cable connection.

The picture will not display in full screen.

y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

y Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

y Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work.

y Replace the remote control batteries with correct polarity (+/–).

y Clean the transmission window located on the top of the remote control.

y Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

does not turn the TV on or off, or adjust

SAMSUNG TV code.

the volume.

A "Mode Not Supported" message

Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution

appears.

settings in this manual.

Caption on the TV menu is greyed out.

y You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component.

y Caption must be activated on the external device.

There is a plastic smell from the TV.

This smell is normal and will dissipate over time.

- 14-

File

Frame

Container Video Codec

Resolution

Extension

rate (fps)

MPEG2

1920x1080

6~30

"*.ts

*.trp

H. 264 BP/

*.tp

1920x1080

6~30

MP/HP

*.m2ts"

MPEG1

1920x1080

24/25/30

"*.dat

*.mpg

MPEG2

1920x1080

24/25/30

*.mpeg

H. 264 BP/

*.vob"

1920x1080

6~30

MP/HP

MPEG4 SP/

1920x1080

6~30

ASP

*.3gp

3GPP

H.264

1920x1080

6~30

H.264

1920x1080

6~30

flash

*.flv

Sorenson

formats

1920x1080

6~30

H.263

Other Restrictions

Video content will not play, or not play correctly, if there is an error in

the content or the container.

Sound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the table above.

If the Index Table is in error, the Seek (Jump) function is not supported.

The menu may take longer to appear if the video's bit rate exceeds

10Mbps.

Video content can not be played, if there are many contents in one file.

Video Decoder

Audio Decoder

Supports up to H.264, Level 4.1

Supports up to WMA7, 8, 9

H.264 FMO / ASO / RS, VC1 SP / MP /

STD, 9 PRO, and 10 PRO

AP L4 and AVCHD are not supported.

WMA 9 PRO and WMA 10 PRO

MPEG4 SP, ASP :

support 5.1 channel.

– Below 1280 x 720: 60 frame max

(LBR mode of WMA Pro is not

– Above 1280 x 720: 30 frame max

Name

File extension

supported.)

H.263 is not supported.

.ttxt

WMA Lossless is not supported.

GMC is not support.

SAMI

.smi

SubRip

.srt

Music

SubViewer

.sub

1. Press the ◄/► buttons to select Music, then press the ENTERE

Micro DVD

.sub or .txt

button in the Media Play menu.

.ssa

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file

.ass

list.

3. Press the ENTERE button or

(Play) button.

✎

During music playback, you can search using the ◄/► buttons.

Name

Container

Format

✎

(REW) and

(FF) buttons do not function during play.

Xsub

AVI

Picture Format

✎

Only displays the files with MP3 file extensions. Other file extensions

are not displayed, even if they are saved on the same USB device.

MKV

Text Format

✎

If the sound is abnormal when playing MP3 files, adjust the

MKV

Text Format

Equalizer in the Sound menu. (An over-modulated MP3 file may

SubRip

MKV

Text Format

cause a sound problem.)

MP4

Text Format

Photos

1. Press the ◄/► buttons to select Photos, then press the ENTERE

Frame

Bit rate

Audio

Resolution

button in the Media Play menu.

rate (fps)

(Mbps)

Codec

2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file

Divx3.11/4.x/

1920x1080

6~30

30Mbps

5.1/6.0

list.

MP3 /

H264

1920x1080

6~30

30Mbps

3. Press the ENTERE button or

(Play) button.

ADPCM /

✎

AVC

1920x1080

6~30

30Mbps

AAC

NOTE

MJPEG

640x480

6~30

10Mbps

While a photo list is displayed, press the

(Play) / ENTERE

button on the remote control to start the slide show.

Divx3.11/4.x/

1920x1080

6~30

30Mbps

"MP3 /

5.1/6.0

All files in the file list section will be displayed in the slide show.

AC3 /

MPEG4 SP/

1920x1080

6~30

30Mbps

LPCM /

During the slide show, files are displayed in order.

ASP

ADPCM

During the slide show, you can adjust the slide show speed using

H264

1920x1080

6~30

30Mbps

/ DTS

(REW) or

(FF) button.

Core"

MJPEG

640x480

6~30

10Mbps

You can move to other file using the ◄/► buttons.

Divx

"MP3 /

3.11/4.x/

1920x1080

6~30

30Mbps

AC3 /

5.1/6.0

LPCM /

ADPCM

MPEG4 SP/

1920x1080

6~30

30Mbps

/ WMA

ASP

/ WMA

H.264

1920x1080

6~30

30Mbps

Pro"

TV Signal Strength is unavailable in the

This function is only available for digital channels from an Antenna / RF / Coax connection.

Self Diagnosis Test menu.

TV is tilted to the right or left side.

Remove the stand base from the TV and reassemble it.

The Channel menu is greyed out

The Channel menu is only available when you select the TV source.

(unavailable).

Your settings are lost after 30 minutes or

If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo

every time the TV is turned off.

mode to Home Use mode using the Plug & Play procedure. Press the

Setup → Plug & Play → ENTERE.

You have intermittent loss of audio or video.

Check the cable connections and reconnect them.

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long

term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

This is part of the product's design and is not a defect.

closely at the edge of the frame of the TV.

POP (TV's internal banner ad) appears on

Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

the screen.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or

dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎

Watch these troubleshooting on video at www.samsung.com/spsn.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.

Storage and Maintenance

✎

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray water directly onto the

SOURCE

button on the remote control.

product. Any liquid that goes into the

product may cause a failure, fire, or electric

shock.

License

DivX Certified® to play DivX® video up to HD 1080p,

including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX

video. Visit divx. com for more information and software tools to convert your files into

DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be

registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain

your registration code, locate the DivX VOD section in your device setup menu. Go

to vod. divx.com for more information on how to complete your registration. Covered

by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Manufactured under a license from U.S. Patent No's:

5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616,

7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195,

7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol,

and DTS and the Symbol together are registered

trademarks & DTS Premium Sound is a trademark of

DTS, Inc.

Manufactured under a license from U.S. Patent No's:

6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452,

5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907,

8,050,434, 7,720,240, 7,031,474, 7,907,736 and

7,764,802. DTS, the Symbol, and DTS and the Symbol

together are registered trademarks & DTS Studio Sound is

a trademark of DTS, Inc.

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and

other countries.

y Supported Photo Formats

Settings

Bit rate

Audio

(Mbps)

Codec

Image

Photo

Resolution

AC3 /

Using the Setup Menu

30Mbps

AAC /

Base-line

15360 x 8704

MP3 /

JPEG

■ DivX® Video On Demand: Shows the registration code authorized

30Mbps

DD+ /

Progressive

1024 x 768

for the TV. If you connect to the DivX web site and register with

HE-AAC

10-digit registration code, you can download the VOD activation file.

30Mbps

Other Restrictions

AC3 /

Once you play it using Media Play, the registration is completed.

MPEG /

30Mbps

✎

For more information on DivX® VOD, visit "http://vod.divx.com".

LPCM /

y CMYK and YCCK Color space JPEGs are not supported.

■ Information: Select to view information on the connected device.

30Mbps

AAC

Playing Multiple Files

30Mbps

MP3

Other Information

■ Playing selected video/music/photo files

30Mbps

1. Press the Yellow button in the file list to select the desired file.

30Mbps

2. Repeat the above operation to select multiple files.

Installing the Wall Mount Kit

MP3

30Mbps

✎

NOTE

The wall mount kit (sold separately) allows you to mount the TV on the

The c mark appears to the left of the selected files.

wall.

To cancel a selection, press the Yellow button again.

For detailed information on installing the wall mount, see the instructions

To deselect all selected files, press the

TOOLS

button and select

provided with the wall mount items. Contact a technician for assistance

Deselect All.

when installing the wall mount bracket. Samsung Electronics is not

3. Press the

button, and then select Play Selected Contents.

TOOLS

responsible for any damage to the product or injury to yourself or others

■ Playing the video/music/photo file group

if you elect to install the wall mount on your own.

1. While a file list is displayed, move to any file in desired group.

Wall Mount Kit Specifications (VESA)

2. Press the

TOOLS

button, and then select Play Folder.

✎

The wall mount kit is not supplied, but sold separately.

Media Play - Additional Functions

Install your wall mount on a solid wall perpendicular to the floor. When

attaching to other building materials, please contact your nearest dealer.

■ Videos/Music/Photos Play Option menus

If you install the TV on a ceiling or slanted wall, it may fall and result in

When playing a file, press the

TOOLS

button.

severe personal injury.

✎

Specifications

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

SOURCE

button to select TV mode, go to

→

Storage Humidity

Model Name

Display Resolution

Screen Size

(Diagonal)

Sound

Output

Dimensions (W x H x D)

Body

With stand

Weight

Without Stand

With Stand

✎

Design and specifications are subject to change without prior notice.

✎

This device is a Class B digital apparatus.

✎

For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.

✎

Typical power consumption is measured according to Energy Star Program requirements for televisions.

Clean the product with a soft cloth

✎

dampened with in a small amount of water.

Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/

Do not use a flammable liquid (e.g. benzene,

recyclingdirect or call, (877) 278-0799.

thinners) or a cleaning agent.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://

opensource.samsung.com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact

Samsung via Email (oss.request@samsung.com).

 This product uses some software programs which are distributed under the

Independent JPEG Group.

ICU License - ICU 1.8.1 and later

rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this

software and associated documentation files (the "Software"), to deal in the Software

without restriction, including without limitation the rights to use, copy, modify, merge,

publish, distribute, and/or sell copies of the Software, and to permit persons to whom

the Software is furnished to do so, provided that the above copyright notice(s) and

this permission notice appear in all copies of the Software and that both the above

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE

FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,

OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used

in advertising or otherwise to promote the sale, use or other dealings in this Software

without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their

respective owners.

- 15 -

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may

cause the TV to fall. In particular, ensure that your children

do not hang over or destabilize the TV; doing so may cause

the TV to tip over, resulting in serious injuries or death.

Follow all safety precautions provided on the included

Safety Flyer. For added stability, install the anti-fall device for

safety purposes, as follows.

To prevent the TV from falling

✎

Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto the wall.

Make sure the screws are firmly fixed into the wall.

2. Remove the screws from the back center of the TV, put the screws

into the clamps, and then fasten the screws onto the TV again.

3. Connect the clamps fixed onto the TV and the clamps fixed onto the

wall with a strong cable and then tie the string tightly.

✎

Verify all connections are properly secured. Periodically check the

connections for any sign of fatigue or failure. If you have any doubt

about the security of your connections, contact a professional

installer.

✎

Install the TV close to the wall so that it does not fall.

✎

It is safe to connect the string so that the clamps fixed on the wall

are equal to or lower than the clamps fixed on the TV. Untie the

string before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically fix the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

✎

Please find a "K" icon on the rear of the TV. The Kensington slot is

beside the "K" icon.

✎

The position and color may differ depending on the model.

Assembling the Stand Wire Holder

for 28", 29" models

Caution of the cover-jack

CAUTION: The cover-jack is for use by qualified service

personnel only. To reduce the risk of electric shock or fire

VESA screw hole specs (A

Standard

Quantity

hazard, do not use the cover jack, unless you are qualified

* B) in millimeters

Screw

to do so.

75 X 75

TV Rear Panel

100 X 100

200 X 200

400 X 400

Cover-jack

Do not install your Wall Mount Kit

while your TV is turned on. It may

result in personal injury due to

electric shock.

✎

The rear panel may differ depending on the model.

- 12 -

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

UN19F4000

UN22F5000

UN28F4000

UN29F4000

1366 x 768

1920 x 1080

1366 x 768

19" Class

22" Class

28" Class

29" Class

(18.5" measured diagonally)

(21.5" measured diagonally)

(27.5" measured diagonally)

(28.5" measured diagonally)

3W x 2

5W x 2

17.8 X 11.2 X 1.9 inches

20.2 X 12.6 X 1.7 inches

25.3 X 15.3 X 1.9 inches

26.3 X 15.5 X 1.9 inches

(453.7 X 285.8 X 49.5 (mm))

(513.1 X 321.5 X 43.8 (mm))

(645.0 X 389.4 X 49.5 (mm))

(668.6 X 394.7 X 49.5 (mm))

17.8 X 12.3 X 4.9 inches

20.2 X 14.4 X 6.6 inches

25.3 X 18.0 X 7.5 inches

26.3 X 18.4 X 7.5 inches

(453.7 X 314.2 X 124.9 (mm))

(513.1 X 366.5 X 169.6 (mm))

(645.0 X 457.7 X 191.7 (mm))

(668.6 X 467.5 X 191.7 (mm))

5.5 lbs (2.5 kg)

5.7 lbs (2.6 kg)

9.2 lbs (4.2 kg)

9.4 lbs (4.3 kg)

5.7 lbs (2.6 kg)

6.3 lbs (2.9 kg)

10.3 lbs (4.7 kg)

10.5 lbs (4.8 kg)

- 16 -

2013-03-18

4:45:57

Show Quick Links

Hide quick links:

This manual is also suitable for:

Un19f4000afUn22f5000afUn19f4000 Un22f5000 Un28f4000 Un29f4000

Specifications; Troubleshooting - Samsung UN19F4000AFXZA User Manual

Troubleshooting

Specifications

Hide quick links:

Related Manuals for Samsung UN19F4000AFXZA

Related Content for Samsung UN19F4000AFXZA

This manual is also suitable for: