Epson Stylus Pro 4900 Limited Warranty page 8

EPSON Preferred
®
Limited Warranty Program for the Epson Stylus
SM
® Pro 17-inch Wide Format Printers
return. (For details on packaging and shipping, please see "Repackaging and Transportation
Instructions" below.)
Repackaging and Transportation Instructions: To avoid permanently damaging the printer, it is
extremely important that you follow the instructions below when preparing to ship or transport
the printer. (Please refer also to the additional instructions in your Printer Guide.)
NOTES:
• In case shipment of the printer for service becomes necessary, to prevent un-repairable
damage to the printer, the printer should be packaged in its original box and packaging
materials and secured to a pallet. If you do not have these items, you must contact Epson
and Epson will supply appropriate items for your shipment.
• Have at least two people lift the printer when packaging or transporting it.
INSTRUCTIONS:
1) Turn on the printer.
2) Remove any paper or other media in the printer. Remove the roll paper spindle and
paper tray.
Note: Remove any partially used cartridges. To store any partially used cartridges that you
take out before shipment, tape over the needle valve hole until you are ready to use the
cartridges again.
3) Turn off the printer. Make sure the print head is in the home (far right) position.
CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will
not be able to lock the print head in the home position, and ink left inside the reservoir will
leak out, damaging the printer.
4) If you have installed any optional components, remove them before shipping.
WARNING: Components may be hot. After turning off and unplugging the printer, make
sure you allow each component to cool before handling it.