Network Printing On A Pc - Epson Stylus Photo - Ink Jet Printer Product Information Manual

You see the Utility menu:
3. Click the
Status Monitor
amount of ink remaining in the printer and displays the
Status Monitor window:
Click to control messages
and warnings
4. If you want to change printer messages and warnings,
click the
Configuration
You see the following dialog box:
Printing stops when
these messages
appear.
Printing continues
when these messages
appear.
5. Choose the options you want and click
icon. The software checks the
Click to recheck
ink level
button.
.
OK

Network Printing on a PC

You can use your printer on a network under Windows 95
or other network operating systems. The Spool Manager
sends journal files from your computer to a shared directory
on a network server. These files can then be printed from
another computer attached to the printer.
First you need to install the EPSON Stylus Photo printer
software on each computer that is going to print on the
network. Then run Spool Manager and identify the shared
directory to use for journal files. After you set this up on the
system connected to the printer (the host system), you need
to perform a similar procedure on each remote system on
the network.
Under Windows 95, you also need to specify the port and
network path to the printer.
Setting Up the Host System
Follow these steps to set up the computer connected to the
printer:
1. Create an icon for the EPSON Spool Manager
(EPSPMGR4.EXE) in the \WINDOWS\SYSTEM folder.
2. Place this icon in the Startup folder.
3. Open the Spool Manager window as described on page 6.
4. In the Spool Manager window, double-click the queue you
want to use for network printing. The Queue Setup dialog
box appears.
5. Click the
Remote Despool
from remote queues
6. Click the
Browse
directory that will receive journal files.
7. Click and minimize the Spool Manager.
OK
Setting Up Remote Systems
Follow these steps to set up computers on the network:
1. Create an icon for the EPSON Spool Manager
(EPSPMGR4.EXE) in the \WINDOWS\SYSTEM folder.
2. Open the Spool Manager window as described on page 6.
3. In the Spool Manager window, double-click the queue you
want to use for network printing. The Queue Setup dialog
box appears.
4. Click the
Spool to remote printer
5. Click the Browse
using for journal files on the remote server.
6. Click and minimize the Spool Manager.
OK
3/97
EPSON Stylus Photo
tab and then click the
option.
button and select the remote server
button.
button and select the directory you're
EPSON Stylus Photo - 9
Printing