Restarting The Lexmark Solutions Application Server; Distributing A Solution File And Installing The Solution Using Lmc; Managing The Ldd 4.X System List - Lexmark C792 Manual

Testing and deploying workflow solutions

Restarting the Lexmark Solutions Application Server

If you install a workflow solution that includes a component, then you may need to restart the Lexmark Solutions
Application Server for the solution to fully function.
Before restarting the Lexmark Solutions Application Server, set the server offline on the System tab in LMC. Make sure
the server is offline before proceeding. Click Refresh, and then make sure offline is reported in the Status column
for the server.
You can restart the Lexmark Solutions Application Server from the Windows Services control panel.
Note: When you restart the Lexmark Solutions Application Server service, any solution‑related file in the \Lexmark
\Solutions\apps\wf-ldss\ or \Lexmark\Solutions\apps\wf-ldss\solutions folders, such as a property file for a solution,
is reverted to the version stored with the solution package as it was initially installed or upgraded, and any manual
changes are lost.

Distributing a solution file and installing the solution using LMC

When the development system does not have access to the LDD server system, you can distribute the solution file and
install the solution using LMC.
Note: The following procedure applies to LDD 4.3 or later. For information about manually installing a solution on an
LDD 4.2 system, see the documentation for LDD 4.2.
1
If Build Automatically is not enabled on the Project menu, then select the solution in the Package Explorer pane,
and then click Project > Build Project.
2
Distribute and install the solution file:
a
Open LMC.
b
Click the Solutions tab.
c
Select All Solutions from the Solutions list.
d
Click Install/Upgrade.
e
In the window that appears, type a path to a solution file, or click Browse to browse for the solution file.
Note: For general distribution, the solution file is located in the \target\install folder within the main folder
of the solution project. The solution file has an extension of .solution.
f
Click Upload.

Managing the LDD 4.x System List

To access the LDD 4.x System List window, click LDD SDK > LDD 4.x System List.
From the System List window, you can:
•
Add a new server system:
1
Click New.
2
Type either the host name or IP Address of the load balancer.
3
If necessary, change the port used to access LMC.
67