Lexmark C792 Manual page 40

Developing workflow solutions
Profile buttons
You can package profile buttons to appear on the home screen as part of the device policy for e‑Task and e‑Task 2
devices. When e‑Task or e‑Task 2 is selected in the Device Group list, the Profile Button(s) section appears. Additionally,
when e‑Task 2 is selected, a selection appears for e‑Task 2 or e‑Task 2+ profile buttons, representing older and newer
e‑Task 2 printers, respectively. You can determine which setting to use by matching the preview of the default image
with the look of the existing buttons on the printer display.
You can load separate images for Up Image, shown when the button is in its default state, and Down Image, shown
while the user is pressing the button. If no Down Image is specified, the Up Image is used for both conditions.
Note: File names of images used for the home screen cannot contain double‑byte characters.
Images selected are resized to the following dimensions for each device class. For best results, resize or crop source
images to the correct size before use.
•
e‑Task—120 x 80 pixels
• e‑Task 2 and e‑Task 2+, SFP e‑Task 2+—120 x 75 pixels
•
e‑Task 3—172 x 254 pixels
•
X642—120 x 55 pixels
eSF applications
To associate an eSF application with the e‑Task 2 sub‑policy for a hybrid solution, click Import beside the eSF Applications
list, and then locate an eSF application. Select the newly imported application in the list, and then make sure e‑Task2
is selected in the Device Group list. To remove a previously imported eSF application, select it from the list, and then
click Remove.
Note: File names of eSF applications used in a solution cannot contain double‑byte characters.
To manage the settings associated with the eSF application and allow later configuration of the application in LMC,
import and configure the descriptor file for the eSF application.
Notes:
•
LDD cannot accept colons in XML tag names, which appear in some descriptor files for eSF applications. If you
upload a solution with a descriptor file containing colons in tag names, then the Solutions tab and the eSF
Configuration task for device groups will no longer function, and intervention from Lexmark Professional
Services will be required to restore access. Before importing the descriptor file, open it in a text editor and
remove any colons from tag names. For example, if the tag <esf:display pattern="instptrn">
appears in the file, change it to <esfdisplay pattern="instptrn">. Make sure to change matching
closing tags as well.
•
LDD can only manage eSF application settings for e‑Task 2+ printers. You must configure eSF application settings
for e‑Task 2 and X642 printers using the Embedded Web Server on each printer after the application is
deployed.
1
Select the eSF application from the eSF Application list.
2
Click Descriptor.
3
Locate the XML descriptor file for the eSF application. The file name should be the same as the file name of the eSF
application, with an "xml" extension and "_desc" appended before the extension.
4
Click Open.
5
Select the eSF application from the eSF Application list.
40