Epson Stylus COLOR 480/480SX - Stylus Color 480SX Ink Jet Printer Installation & Operation Manual page 4

EPSON Stylus COLOR 480SX
Humidity (without condensation)
Operation 20 to 80% RH
*
Storage 5 to 85% RH
*Stored in shipping container
Safety Approvals
Safety standards UL 1950, CSA C22.2 No. 950
EMC FCC part 15 subpart B class B
Setting Up the Printer for the First
Time
Connect the Printer and Computer
1. Make sure the printer is unplugged and your computer is
turned off.
2. Connect the larger end of the parallel cable to your printer's
parallel port. Then secure it with the wire clips.
3. Connect the other end of the cable to your computer's
built-in parallel port and secure it as necessary.
Connect the printer to the built-in parallel port (LPT1). To
use a different port, see Windows help.
Turn On Your Computer
Turn on your computer first and wait for the main Windows
screen or an Add New Hardware Wizard screen to appear.
(With Windows NT and Windows 2000, log on as
®
necessary.)
Plug In the Printer
Plug the printer's power cord into a grounded electrical outlet.
The printer is now powered on. It moves its print head and
makes some noise.
Don't use an outlet controlled by a wall switch or timer,
or one on the same circuit as a large appliance, to avoid
damaging the printer's power supply.
EPSON Stylus COLOR 480SX
4 -
Put In the Paper
Set paper carefully in the slot in the top of the printer; don't
push it deeper into the slot. Slide the left edge guide against
the paper.
Load paper only
up to this arrow
Install the Software
Locate the CD-ROM that came with your printer and
carefully follow the steps here to install the printer software.
1. If you see this screen, click
printer software that way. (This screen may appear later in
the installation process.)
2. Insert your printer software CD-ROM in a CD-ROM or
DVD drive.
3. Double-click
My Computer
4. Double-click the
5. Double-click
EPSON
6. Select .
English
6/00
Slide paper against
the right edge
. You can't install your
Cancel
on your screen.
CD-ROM or DVD icon.
EPSON
to start the installer.