<E>
PAD PCB
2. Turn open the palmrest unit.
3. Disconnect the two connectors CN701 and CN703.
4. Remove the two screws <E>.
5. Remove the PAD PCB.
Screw <E>: XTB2+5GFN
6. Remove the screw <E>, and remove the pad holder.
7. Peel the Touch pad.
Screw <E>: XTB2+5GFN
Palmrest Unit
Open
CN701
CN703
Figure 5
<E>
Pad Holder
Touch Pad
Figure 6
6.4 Removing the RAM Card.
RAM Card Cover
1. Remove the screw <A>, and remove the RAM card
cover.
Screw <A>: XYN2+J12FZ
6.5 Removing the Keyboard.
Remove
KB Fdge L
1. Remove the KB edge L and the KB edge R.
6 - 2
<A>
RAM Card Connector
Figure 7
Remove
KB Fdge R
Figure 8