Panasonic CF-72X3UUBDM - Toughbook 72 - Pentium 4-M 1.8 GHz Service Manual page 33

Service manual
Table of Contents

Advertisement

For 4. RS232C CONTROLLER REGISTER R/W TEST.
Press 4 and Enter keys.
(Normal Message): Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
For 5. INTERNAL LOOPBACK TEST.
Press 5 and Enter keys.
(Normal Message):
When an error message is displayed, refer to [5.2 Error Message].
For 6. EXTERNAL LOOPBACK TEST.
Press 6 and Enter keys.
(Normal Message): Test done ! !
When an error message is displayed, refer to [5.2 Error Message].
11) PCCARD CONTROLLER TEST.
Press 14 and Enter keys.
(Normal Message): Test done ! !
when an error message is displayed, refer to [5.2 Error Message].
12) INFRARED COMMUNICATION PORT TEST.
Press 15 and Enter keys.
1st serial port test (I/O address xxxH)
Press any key when ready._
1st serial port test (I/O address xxxH)
Test done ! !
Press any key when ready._
1st serial port test (I/O address xxxH)
Connect loopback plug.
Hit any key when ready._
Hit any key when ready._
Loopback Plug Wiring Information
1
2
3
4
5
6
7
8
9
PCCARD CONTROLLER
Press any key when ready._
1. TEST ALL DEVICES
2. TEST AUTOMATICALLY (
3. EXIT
4. CONTROLLER REGISTER R/W TEST
5. INTERNAL LOOPBACK TEST
SELECT MENU : _
Connect the loopback plug
to the serial port.
(
DEVICES)
DEVICES)
5 - 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Toughbook cf-72 seriesCf-72 z series

Table of Contents