Installing Software And Connecting Picturemate - Epson PictureMate - Compact Photo Printer Using Manual

Installing Software and Connecting PictureMate

To connect PictureMate, you'll need this cable:
If you don't already have a USB cable, you can buy one from your local
computer dealer or from Epson.
When you're ready to start, see the section for your computer system:
For Windows,
For Macintosh,
Install PictureMate for Windows
First make sure PictureMate is NOT CONNECTED to your computer,
and REMOVE your memory card, if it's inserted. Then:
1. Load a sheet of PictureMate Photo Paper,
glossy side up, against the right edge of the
paper feeder. Slide the edge guide against
the paper and open the output tray.
2. Press the P
3. Turn on your computer.
®
see below.
®
see page 6.
button to turn on PictureMate.
On
®
See the inside back cover for details.
1
Type A to B
USB cable