Appendix. Product Specifications; Weight And Physical Dimensions; Facility Requirements; Physical Dimensions And Weight Of The Switch - IBM SAN40B-4 - System Storage Switch User & Service Manual

Appendix. Product specifications

This appendix contains the following information:
v "Weight and physical dimensions"
v "Facility requirements"
v "Environmental requirements" on page 36
v "Memory specifications" on page 37
v "Data transmission ranges" on page 37
v "Fibre Channel port specifications" on page 38
v "Serial port specifications" on page 38
v "Power supply specifications" on page 38
v "Supported SFPs and HBAs" on page 39
v "System specifications" on page 39

Weight and physical dimensions

Table 10 lists the weight and physical dimensions of the switch.

Facility requirements

To ensure correct operation of the switch, the facility where the switch is in use
must meet the requirements listed in Table 11.
© Copyright IBM Corp. 2008
Table 10. Physical dimensions and weight of the switch
Dimension
Height
Width
Depth
Weight (with two power supply/fan assembly
units installed, no SFPs)
Table 11. Facility requirements
Type
Electrical
Measurement
4.29 cm (1.69 in.)
42.88 cm (16.88 in.)
60.96 cm (24 in.)
9.34 kg (20.6 lb)
Requirements
v Primary AC input 90-264 VAC (switch
autosenses input voltage), 47-63 Hz.
v Adequate supply circuit, line fusing, and
wire size, as specified by the electrical
rating on the switch nameplate
v Correctly wired primary outlet, protected
by a circuit breaker and grounded in
accordance with local electrical codes
35