Partial/Complete Thaw Warning; Function Errors - AEG ÖKO-ARCTIS SUPER 3173-4GS Operating Instructions Manual

Control and Information Systems
The audible warning can be switched off with the WARNING OFF but-
ton.
Both warning display and audible warning are automatically switched
off when the actual temperature in the freezer compartment falls to
4°C warmer than the selected SET temperature.
Note:
• The red warning display and the audible warning are inoperable:
after temperature adjustment, until the selected SET temperature has
been reached (exception: actual temperature exceeds -10°C).
• Only the audible warning is inoperable:
– after the appliance is switched on, and until the selected SET
temperature has been reached for the first time;
– when the FAST FREEZE button is depressed.

Partial/Complete Thaw Warning

If frozen goods have been partially or completely thawed (e.g. during a
temporary power interruption), the red warning display blinks.
In addition the temperature display alternately indicates:
– the highest temperature to which the frozen goods have warmed;
– and the current actual temperature in the freezer compartment.
If suspicion of partial or complete thawing exists, please check the qua-
lity of the foods to determine if they can be used.
As soon as the temperature in the freezer compartment has again fal-
len below the critical thawing temperature of -4°C, the partial/com-
plete thaw warning can be switched off with the WARNING OFF
button.
Note: After the appliance has been switched on, the partial/complete
thaw warning remains inoperative until the selected SET temperature
has been reached for the first time.

Function Errors

If the appliance electronics have detected a technical malfunction
which has to be corrected by a customer service technician, both opti-
cal and acoustic warnings are activated. In addition the temperature
display alternately indicates:
– an error message (error code F1, F2, etc.) and
– the current freezer compartment temperature (actual temperature).
Note: An appliance malfunction which is indicated by an error code,
must be corrected by a customer service technician. The acoustic
26