HP Media Center m7000 - Desktop PC Reference Manual page 53

Making the backup CD
1
Click Start on the taskbar, choose All
Programs, RecordNow!, and then click
RecordNow! again. The RecordNow!
window opens.
2
Insert a blank CD.
3
Select the Data Projects tab, and then click
Data Disc.
4
Click Continue.
5
Click Add Files and Folders. The Select
files and folders to add window opens.
6
In the Look in box, select Desktop from the
drop-down list.
7
Click the backup file (for example,
Backup.bkf) so it appears in the File name
box. Click Add. The window closes.
Using the code key backup CD after a system recovery
1
Insert the backup CD you made into a drive.
The drive window opens and shows the disc
contents.
Or
If the window does not open automatically,
click Start, My Computer, and then right-
click the drive icon to view the contents of
your backup disc.
2
Double-click the backup file (for example,
Backup.bkf). The Backup or Restore Wizard
opens.
3
Click Next.
4
Choose Restore files and settings, and
then click Next.
5
When the What to restore window opens,
click Browse, and the Browse window shows
the (A:) drive.
8
In the RecordNow! window, click the red
Burn icon. If a warning window opens,
click OK.
9
Wait while the program writes to the CD and
the disc tray ejects.
10
Remove the CD, label it, and store it in a
safe place for use with the next procedure.
Click Done.
11
Close the RecordNow! window.
12
Because you do not need the backup file you
created, drag the file to the Recycle Bin on the
desktop. This deletes the copy of the file that
was on the hard disk drive.
6
Click Browse again, and the window shows
Select file to catalog.
7
Click the drop-down menu arrow, and click
the optical drive with the backup CD.
8
Click the backup file name.
9
Click Open and then click OK.
10
In the Items to restore box, click the plus sign
(+) for the backup file name. The file tree
expands. Click the C box so a check mark
appears. Click the System State box so a
check mark appears.
11
Click Next.
12
The Backup or Restore Wizard window shows
the message You have created the following
restore settings. In the window, click the
Advanced button. Click Next.
Watching and Recording TV Programs
47