Appliance Description; Control Panel; Starting Up - AEG ARCTIS 189 GT Operating Instructions Manual

Appliance Description

Control Panel

Starting Up

Please clean the appliance interior and all accessories prior to initial start up
(see section: "Cleaning and Care").
Insert the mains plug of the chest freezer into the mains supply. Set the
thermostat control knob to a medium setting and leave the appliance to run
for 2 hours before placing any food inside.
The temperature inside the freezer must be -18 °C or colder. This can be
checked by measuring the temperature of the top middle package.
When the appliance has reached the correct temperature for safe storage of
frozen food the red signal light will illuminate. If the temperature in the
freezer is too high the light will go out. The light may go out for the following
reasons:
There is a power failure.
The lid has been recently opened.
A large quantity of food has been added to the appliance.
There is a fault.
Important: Check regularly on the red temperature warning light and on a
thermometer placed inside whether the storage temperature is being
maintained.
10
Thermostat
control knob
Signal light