Related Manuals for AEG K 7 18 40 - 1i
Summary of Contents for AEG K 7 18 40 - 1i
- Page 1 SANTO K 7 18 40 - 1i Integrated Fridge Freezer Operating and Installation Instructions...
- Page 2 Dear customer, Before placing your new refrigerator/freezer into operation please read the- se operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
-
Page 3: Table Of Contents
Contents Safety ...........4 Disposal . -
Page 4: Safety
Safety Please read this instruction book before using the appliance and retain for future reference. These warnings are provided in the interests of your safe- ty, ensure you understand them fully before using the appliance. Intended use • The appliance is intended for use in the home. It is suitable for the coo- ling, freezing and storing of frozen food, as well as for making ice. -
Page 5: Disposal
• Bottles and cans must not be placed in the freezer compartment. They can burst when the contents freeze, high carbonate content drinks can even explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in the freezer compartment. -
Page 6: Disposal Of Old Appliances
Disposal of old Appliances For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - to your new appliance as well. Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures, to prevent small children being trapped inside. -
Page 7: Starting Up And Temperature Regulation
0°C. You should reset the temperature control knob to setting “3” or “4”, if this does occur. As soon as the fresh food placed in the freezer has frozen, return the tem- perature control knob to “3” or “4”. Important! High ambient temperatures (e.g. -
Page 8: Interior Accessories
Interior Accessories Storage Shelves The glass shelf above the fruit and vegetable compartment always remain in position, to ensure fruit and vegetables stay fresh longer. The remaining storage shelves can be adjusted to various heights: Pull the storage shelf forward until it can be tipped up or down and remo- ved. -
Page 9: Freezing And Storing Frozen Food
• Bottles and cans must not be placed in the freezer. They can burst when the contents freeze, high carbonate content drinks can even explode! Never store lemonade, juices, beer, wine, sparkling wine etc. -
Page 10: Preparation Of Ice Cubes
Preparation of Ice Cubes Fill the ice cube tray 3/4 full with cold water, place it in the freezer com- partment and leave to freeze. To loosen the frozen cubes, either twist the ice cube tray or hold it under running water for a few seconds. -
Page 11: Switching Off The Appliance
Remove all refrigerated and deep-frozen packages as well as ice trays. Remove the mains plug or switch off. Defrost freezer compartment and clean thoroughly (see section: “Cleaning and Care”). Leave the door open to avoid the build up of odours. -
Page 12: Energy Saving Tips
– cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. • Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liqiud added. -
Page 13: Something Not Working
Something Not Working If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Warning! Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning. -
Page 14: Changing The Light Bulb
If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. -
Page 15: Service And Spare Parts
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: Your telephone call will be automatically routed to the Service Force Cen- tre covering your post code area. -
Page 16: Guarantee Conditions
Guarantee Conditions Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documen- tation. -
Page 17: Installation
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. -
Page 18: Positioning
Positioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rat- ing plate, which is located on the inside left of the appliance. The following table shows which ambient temperature is correct for each climate classification. -
Page 19: Inner Door Reversal
Inner door reversal Using a screwdriver release bracket (1) by pressing on the internal spring and withdraw it from its seat together with the door; remove plug (2) and fit it in the hole left open on the opposite side; turn the door through 180°, remove the bracket (1) and refit it on the opposite side. -
Page 20: Instructions For Building-In
Instructions for building-in Apply joint the sealing strip as shown in figure. An additional midpoint location bracket may be fitted to the appli- ance (as shown) to assist retention of the housing side wall. Drill the unit using a (10 mm max. penetration. Fix the square fitting (1) to the appli- ance. - Page 21 Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap ventilation grille (C) and hinge cover (D) into position. Apply covers (B) into the relevant holes.
- Page 22 Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied. PR166 Fix cover (C) on guide (A) until it clips into place.
-
Page 23: Regulations, Standards, Guidelines
At the end of installation/adjusting, it is necessary to check if the door of the furniture closes properly. Should adjustment of the furniture door be necessary, use the clearance slots. Fix cover (D) on guide (B) until it clips into place. Regulations, Standards, Guidelines This appliance was designed for household use and was manufactured in accordance with the appropriate standards. - Page 24 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de 2222 221-43...