Converting Raw Images - Canon PowerShot SD300 Software Starter Manual
Software starter guide (for the canon digital camera solution disk ver.21)
Hide thumbs
Also See for PowerShot SD300:
- Manual (130 pages) ,
- Software manual (60 pages) ,
- Owner's manual (54 pages)
Table of Contents
Advertisement
70
Converting RAW Images
Converting RAW Images
RAW images are extremely high-quality images that are not subject to any deterioration due to
compression processing. Since they are recorded with a special file format, they cannot be
opened by many image editing programs. It is necessary to convert them to standard image file
formats, such as TIFF or JPEG.
• See Information about Your Camera (p. 96) to determine whether your
camera model supports this function.
• See the Camera User Guide for information about the camera settings for
shooting RAW images.
Procedures for Converting RAW Images
1
Select a RAW image in ImageBrowser's Browser Area.
2
Click the [File] menu and select [RAW Image Processing].
The main window, the Navigator window
and the Image Quality Adjustment Window
will display.
Use the buttons here to switch between
images and display modes, rotate images,
and set the conversion parameters.
Thumbnail
Check Mark
If the navigator window does not display, click the [View] menu and
select [Show Navigator].
3
Adjust the image quality as required in the Image Quality Adjustment Window.
This window is explained in the Functions of the Image Quality Adjustment Window
section.
Main Window
Advertisement
Table of Contents
