Connecting An Antenna Or Cable Tv (No Box) - Dynex DX-19E220A12 User Manual

Making connections
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side of your TV and to the
coaxial out jack on the cable or satellite box.
Cable or satellite box
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 18.
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Side of TV
Coaxial cable
Connecting an antenna or cable TV (no
box)
To connect an antenna or cable TV (no box):
1
Turn off your TV and all connected equipment.
2
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side of your TV and to the
antenna or cable TV wall jack.
3
Turn on your TV, then go through the setup wizard
on page 18.
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
11
DX-19E220A12
Side of TV
Coaxial cable