Manager Programming; Programming Information - Panasonic KX-TDE100 Operating Manual

3.2 Manager Programming

3.2.1 Programming Information

The manager can program the following item.
•
Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-DT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
CAUTION
•
The PBX has a default password preset. For security, change the password the first time that you
program the PBX.
•
It is strongly recommended that a password of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in the
password, refer to "1.3.14 Character Entry".
•
To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to others,
the PBX may be misused.
•
Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
3.2.2 Manager Programming
Changing the Settings and Extension Control
To enter the program mode
PROGRAM
OR
PAUSE
Press PROGRAM Enter
or PAUSE.
Item
Changing the manager password.
Document Version 2008-10
manager
1
password
programming
1. Enter manager Follow
programming
password.
input.
0
To program
To continue
HOLD
input
Press
HOLD.
Programming Input
+ + Password (max. 10 digits) +
0
3.2.2 Manager Programming
To exit
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Operating Manual 179