Table of Contents
Advertisement
Basics
Touching the screen and adjusting the focus and
exposure
This function enables the focus and exposure to be set when you touch the subject
displayed on the screen.
• Perform these operations with the touch shutter function
Touch the place where you want to set the focus and exposure
Press the shutter button halfway to bring the subject into
focus, and then press the button fully to record the subject
• To release the touch AF/AE function → Touch
●
The touch AF/AE function may fail to work under some recording conditions such as
when the subject is too small or the recording location is too dark.
●
The touch AF/AE function will not work along the edges of the screen.
●
During [Intelligent Auto] Mode, the camera will determine the optimal scene for the
touched subject.
(Touch AF/AE function)
• When [AF Mode] is set to
Face Detection function continues to operate, but the
focus is adjusted to the place where you touched.
• When [AF Mode] is set to
camera locks onto the subject, and it automatically
continues to focus on the subject and adjusts the
exposure of the subject as the subject moves.
(→32)
.
- 33 -
released.
(Face Detection), the
(AF Tracking), the
VQT4T08
Advertisement
Table of Contents
