[Smart Transfer] - Panasonic DMC-ZS30W Owner's Manual

Wi-Fi

[Smart Transfer]

Preparation: Set [Smart Transfer].
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the
USB connection cable (supplied), and plug the AC adaptor
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection
cable (supplied)
• [Smart Transfer] starts automatically according to the [Charge Priority]
setting.
• [Smart Transfer] is not available when the memory card is locked.
• Depending on the specifications of the PC, [Smart Transfer] may fail.
●
Except at the ambient temperature between 0 °C and 40 °C (32 °F to 104 °F), [Smart
Transfer] may not work.
●
When [Destination] is set to [PC], the pictures are stored in the incoming folder
created. (→217)
●
If there are pictures that are not transferred when [Auto Transfer] is set to [OFF],
the message that confirms whether to transfer these pictures is displayed. Select a
desired option.
■
Transferring pictures now
Preparation: Set [Smart Transfer].
Connect the AC adaptor (supplied) and the camera using the
USB connection cable (supplied), and plug the AC adaptor
(supplied) into the electrical outlet
• Switch to Playback Mode.
Select [Wi-Fi Setup] from the [Wi-Fi] menu and press
[MENU/SET]
Use cursor button to select [Smart Transfer] and press
[MENU/SET]
Use cursor button to select [Transfer Now] and press
[MENU/SET]
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Transferring pictures automatically [Smart Transfer]
(→239)
(→239)
- 240 -
(→242)
VQT4T08