Advanced Operations - Panasonic SC-HTB770 Owner's Manual

Advanced operations

Audio format indicator
To display the current audio format.
Press and hold [SOUND] for more than
4 sec.
≥ The current audio format is indicated for 5 sec.
"STADIUM" indicator blinks:
Dolby Digital is the audio format.
"MUSIC" indicator blinks:
DTS is the audio format.
"CINEMA" indicator blinks:
PCM is the audio format.
Audio format is not indicated when
source.
Changing the dual audio
Change the dual audio from main to secondary.
≥ This setting will only work if the audio output setting on
the connected TV or player, etc. is set to "Bitstream"
and dual audio is available in the audio source.
Press and hold [MUTE] for more than
4 sec.
"STANDARD" indicator blinks (A):
Main (Factory preset)
"STEREO" indicator blinks (B):
Secondary
(SAP: Secondary Audio Program)
When A and B both blink: Main and secondary
While the setting is displayed, press
[MUTE] to change the setting.
≥ The setting changes each time [MUTE] is pressed.
≥ The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥ The setting is maintained until it is changed again.
" "
is selected as the
Auto gain control
With this function, you can prevent sudden loud sounds.
The output will be reduced automatically when the input
exceeds a certain level.
Press and hold [INPUT SELECTOR]
on the remote control for more than
4 sec.
"STANDARD" indicator blinks:
Auto gain control is on.
"STEREO" indicator blinks:
Auto gain control is off.
(Factory preset)
While the setting is displayed, press
[INPUT SELECTOR] on the remote
control to change the setting.
≥ The setting changes each time [INPUT SELECTOR] is
pressed.
≥ The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥ The setting is maintained until it is changed again.
33
RQT9778