Chapter 5 Using The Camera Window; Opening The Camera Window - Canon PowerShot Pro 90 IS User Manual

Chapter 5
Using the Camera Window
This chapter describes how to use the Camera Window of ImageBrowser.
Let's begin by looking at the three ways of opening the Camera Window.
IMPORTANT
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Ensure that the camera and computer are connected with an
interface cable and are ready to communicate before you
perform this procedure.
• If you are using a memory card reader, ensure that the memory
card is loaded into the reader before performing the procedure.
Clicking Canon Camera in the Explorer View Section
In the Explorer View Section, click [Canon Camera] to open the
Camera Window.
Click here.
Using the Canon Camera button
Click (Canon Camera) to display the Camera Window.
Click here.
42
ImageBrowser Software User Guide

Opening the Camera Window

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
To open the Camera Window when you are using a memory
card reader, open the memory card icon in the Explorer View
section and double-click the [DCIM] folder.
○ ○ ○ ○ ○ ○ ○
Opening It Automatically (Mac OS 9 Only)
When you connect the camera to the computer with an
interface cable and prepare it to communicate, ImageBrowser
will automatically start and open the Browser Window and the
ImageBrowser Automation Wizard. If you select [Display
Images] in the ImageBrowser Automation Wizard, the Camera
Window will open.
You can also use the same procedure to open the Camera
Window when ImageBrowser is already running.
REFERENCE
○ ○ ○ ○ ○
• ImageBrowser will not start automatically if the check mark is
removed from [The application program below will start]
category in the [Canon ImageBrowser Auto Launch] control
panel.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○