Setting Up Slide Shows On The Camera - Canon PowerShot Pro 90 IS User Manual

Appendices
If the camera comes with a slide show feature, you can use
ImageBrowser to edit slide shows.
IMPORTANT
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Ensure that the camera and computer are connected with an
interface cable and are ready to communicate before you
perform this procedure.
REFERENCE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• For detailed information on how to use a slide show and display
images, refer to the Camera User Guide that comes with your
camera.
How to set up a slide show
In the Camera Window, click
When the following window appears, select the [Slide Show]
option that appears on the top left part of the window. Then,
use the list below to select a slide show number.
Select a slide show number.
104
ImageBrowser Software User Guide

Setting up Slide Shows on the Camera

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
(Slide/DPOF).
From the image list on the left, drag images to the right area
and arrange their sequence for the slide show.
When you are done arranging the slide sequence, click [Save to
Camera] to save the slide show setup.
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
Click here.
REFERENCE
○ ○ ○ ○ ○
• If you want to change the sequence of some images, just drag
them to the right place in the area on the right.
• If you want to remove an image from the slide show, select the
image. On the [Edit] menu, click [Clear].
Drag images from the image list on the left to the area on the
right and arrange their sequence for the slide show.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○