Replacing an optical drive
1. Open the computer cover. See "Opening the cover" on page 83.
2. Pivot the drive bay assembly upward to gain access to the hard disk drive.
3. Disconnect the signal and power cables from the rear of the optical drive.
4. Slide the optical drive lock 1 to the unlocked position.
5. Open the door at the front of the optical drive and slide it out the front of the
6. Install the new optical drive into the bay. Slide the optical drive lock to the
7. Connect the signal and power cables to the rear of the optical drive.
8. Go to "Completing the FRU replacement" on page 114.
104
Hardware Maintenance Manual
computer.
locked position.