Resetting Disks To Non-Raid - Asus P5E3 DELUXE User Manual

Resetting disks to non-RAID

•
•
To reset disks to non-RAID:
1. In the main JMB363 RAID BIOS menu, highlight Revert HDD to non-RAID
using the up/down arrow key then press <Enter>.
2. Use the space bar to select the HDD that you want to reset to non-RAID.
A selected HDD shows a
3. A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Pressing <Y> deletes all the data in the HDD.
5-50
An HDD that has been previously configured as part of another RAID set in
another platform is called a broken RAID HDD. When you install a broken
RAID HDD, you cannot select this HDD when configuring a RAID set
through the JMB363 utility.
If you still want to use this broken RAID HDD as part of the RAID set
configured through the JMB363, you may do so by resetting the disk to non-
RAID. You will, however, lose all data and previous RAID configurations.
[Main Menu]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to
Solve Mirror Conflict
Rebuild Mirror Drive
Save and Exit Setup
Exit Without Saving
sign before it.
Non-RAID
Chapter 5: Software support