Connect The Fax Line; Load Paper - Epson WorkForce WF-2520 Start Here

4
I nsert the cartridges in the holder for each color, and
press each cartridge down until it clicks.
5
L ower the scanner unit.
6
P ress OK to prime the ink delivery system. This takes
about 4 minutes.
N ote: The cartridges included with the printer are designed
for printer set up and not for resale. After some ink is used for
priming, the rest is available for printing only in the same printer.
C aution: Don't turn off the printer while it is priming or you'll
waste ink.
5
Load paper
1
F lip the feeder guard forward.
2
R aise the paper support, pull out the output tray, then
raise the paper stopper.
3
S lide the edge guide to the left.
4
L oad paper against the right edge guide and behind the
tab line on the left edge guide, with the printable side
faceup.
C aution: Don't load the paper sideways; always load it short
edge first.
5
S lide the edge guide against the left edge of the paper,
but not too tightly.
6
Flip the feeder guard back.
6
Connect the fax line
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on the back of your product. To
connect a telephone or answering machine, use the EXT. port
on your product. See the Quick Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.