Asus P4S533 User Manual page 39

4. DDR Voltage Setting (4 pin DDRVOL1)
This jumper controls the voltage output to the DDR memory DRAMS.
Setting
2.9V
2.7V
2.5V
P4S533
®
P4S533 DDRVOL Setting
CAUTION!
prevent the memory system from being exposed to undue strain.
5. Bass Center Setting (2x3 pin BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver and to
adjust output for 4 or 6 speaker audio. No audio standard exists for the three
pick-up surfaces on male audio jacks, therefore it may be necessary to switch
jumpers from the default position, Bass/Center, to Center/Bass, in order to
reroute signals among the internal leads of the Line-In, Line-Out, Mic female
sockets. Make sure a test is made using the Audio Driver software setup
available on the Support CD.
P4S533
®
P4S533 Bass Center Setting
ASUS P4S533 motherboard user guide
VDDR
[3-4]
[2-3]
[1-2] (default)
1 2
2.5V
(Default)
It is advisable not to increase the voltage excessively to
BCS1
BCS2
(CENTER/BASS)
DDRVOL1
3 4
2 3
2.7V 2.9V
1 2
BCS1
BCS2
(BASS/CENTER)
(Default)
2 3
27