34
What to do if...
Problem
The door will not open:
The machine vibrates or is noisy:
Spinning starts late or the machine
does not spin:
No water is visible in the drum:
The display shows the alarm code
EF0
: :
Cause possible/Solution
The programme is still running.
• Wait until the end of washing cycle.
The door lock has not been released.
• Wait until the DOOR symbol
There is water in the drum.
• Select drain or spin programme to empty out the
water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.
• Redistribute the laundry.
Machines based on modern technology operate very
economically using very little water without affecting
performance.
Anti-flooding system has activated.
• Disconnect the appliance and contact the Service
Force Centre
7.5
disappears.