Additional Rinse/Water Cooling - AEG OKO-LAVAMAT 60300 Instruction Book

Additional Rinse/Water Cooling

The washing machine is set up for extremely low water consumption.
• For people who suffer from an allergy to detergents, it can be useful
to rinse with more water (additional rinse).
• It may be necessary to cool the water before it is pumped out in order
to prevent damage to plastic waste pipes (water cooling).
You can activate these functions using the More Water Switch.
3
The program duration and water consumption are increased by water
cooling and/or the additional rinse.
Position "1": Water Cooling
At the end of the main wash, the water is cooled (by adding cold water)
prior to pumping out.
This setting is only effective for t (COTTONS/LINEN) with a tempera-
ture above 40 °C.
Position "2": Water Cooling and Additional Rinse
The water is cooled as in position 1, and an additional
rinse is also performed during the t (COTTONS/LINEN),
} (EASY-CARES) and à (DELICATES) programs.
3
As supplied the More Water Switch is set to position 0.
Make the Adjustment:
0 1.Pull out the detergent drawer until the More
Water Switch is accessible in the frame on the left.
2. Set the More Water Switch to
"1" (water cooling) or
"2" (water cooling and additional rinse).
Operating instructions
33