Setting The Delay Timer; Starting A Programme; Interrupting A Programme/Adding Washing - AEG LAVAMAT 50212 Operating Instructions Manual

Setting the delay timer

The (DELAY TIMER) button allows you to delay the start of a
programme.
1. Select a programme.
2. Press the
programme to begin in 6 hours. The 6h indicator will illuminate. Press
the (DELAY TIMER) button twice if you would like the wash pro-
gramme to begin in 3 hours. The 3h indicator will illuminate.
If you press the
setting is cancelled. The indicator goes out.
3. To activate the delay timer, press the
Note: If a start delay of 6 hours is selected, the 6h indicator will illumi-
nate. After 3 hours the indicator will change and 3h will illuminate. Af-
ter a total of 6 hours the wash programme will begin.

Starting a programme

1. Check that the tap is turned on.
2. Press the
start after the delay timer has elapsed as set.
During the wash programme the current stage of the programme is
shown in the programme progress display.
If after pressing the
flashes 4x, the door has not been closed properly. Push the door firmly
closed and press the

Interrupting a programme/adding washing

Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
(START/PAUSE) button. It is then re-started by pressing the
(START/PAUSE) button again.
• To stop the washing machine before the programme has ended, turn
the programme knob to
water in the appliance!
Adding washing
It is possible to add washing, as long as the
1. Press the
2. Shut door and press the
gramme continues.
(DELAY TIMER) button once if you would like the wash
(DELAY TIMER) button once again the delay timer
(START/PAUSE) button. The programme starts or will
(START/PAUSE) button the
(START/PAUSE) button again.
(OFF). Important! Be careful if there is
(START/PAUSE) button. The door can be opened.
(START/PAUSE) button.
(DOOR) light is not lit.
(START/PAUSE) button again. The pro-
(END) display
15