Unpacking - AEG LAVAMAT 86810 User Information

• Do not lay the washing machine on its front nor on its right side
(as seen from the front). Electrical components may get wet.
• Never transport the appliance without using the transport lock. Only
remove the transport lock when the appliance is in its place of instal-
lation. Transporting the appliance without the use of the transport
lock can cause damage to the appliance.
• Never lift the appliance by the door when it is open nor by the plinth.
When using a sack trolley to transport the washing machine:
• Only use the sack trolley on the side of the appliance.

Unpacking

1
The transport safeguard must be removed before putting the appliance
into operation.
Important!
You are advised to keep all the packaging for re-use in case the
machine is to be transported again.
1. After removing all the packaging,
with assistance carefully lay ma-
chine on it's back to remove the pol-
ystyrene base from the bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
35