Asus Post Reporter; Vocal Post Messages - Asus P4P800-E DELUXE User Manual

3.3

ASUS POST Reporter™

This motherboard includes the Winbond speech controller to support a
special feature called the ASUS POST Reporter™. This feature gives you
vocal POST messages and alerts to inform you of system events and boot
status. In case of a boot failure, you will hear the specific cause of the
problem.
These POST messages are customizable using the Winbond Voice Editor
software that came with your package. You can record your own
messages to replace the default messages.

3.3.1 Vocal POST messages

Following is a list of the default POST messages and their corresponding
actions:
POST Message
No CPU installed
System failed CPU test
System failed memory test
System failed VGA test
System failed due to CPU
over-clocking
ASUS P4P800-E Deluxe motherboard
Action
• Install a supported processor into
the CPU socket. See section "2.3
Central Processing Unit (CPU)" for
supported processors.
• Check the CPU if properly installed.
• Call ASUS technical support for
assistance. See the "ASUS contact
information" on the inside front
cover of this manual.
• Install supported DDR DIMMs into
the sockets.
• Check if the DIMMs on the DIMM
sockets are properly installed.
• Make sure that your DIMMs are
not defective.
• Refer to section "2.4 System
memory" for instructions on
installing a DIMM.
• Install a PCI VGA card into one of
the PCI slots, or a 1.5V AGP card
into the AGP slot.
• Make sure that your VGA/AGP card
is not defective.
• Check your CPU settings in BIOS
and make sure you only set to the
recommended settings. See section
"4.4 Advanced menu."
3-3