MSI 785GTM-E45 - Motherboard - Micro ATX User Manual page 56

▍ ▍ BIOS Setup BIOS Setup
▶ DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu and the followng screen appears. Ths sub-
menu dsplays the nformaton of nstalled memory.
▶ Advance DRAM Configuraton
Press <Enter> to enter the sub-menu and the followng screen appears.
▶ DRAM Tmng Mode
Ths field has the capacty to automatcally detect all of the DRAM tmng. If you set
ths field to [DCT 0], [DCT 1] or [Both], some fields wll appear and selectable. DCT
0 controls channel A and DCT1 controls channel B.
▶ 1T/2T Memory Tmng
When the DRAM Tmng Mode sets to [DCT 0], [DCT1] or [Both], the field s adjustable.
Ths field controls the SDRAM command rate. Selectng [1T] makes SDRAM sgnal
controller to run at 1T (T=clock cycles) rate. Selectng [2T] makes SDRAM sgnal
controller run at 2T rate.
▶ DCT Unganged Mode
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
▶ FSB/DRAM Rato
Ths tem allows you to select the rato of FSB/ DRAM.
▶ Adjusted DRAM Frequency (MHz)
It shows the adjusted Memory frequency. Read-only.
▶ HT Lnk Speed
Ths tem allows you to set the Hyper-Transport Lnk speed. Settng to [Auto], the system
wll detect the HT lnk speed automatcally.
3-20