MSI 785GTM-E45 - Motherboard - Micro ATX User Manual page 28

▍ ▍
Hardware Setup Hardware Setup
Seral ATA Connector: SATA1~6
Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect
to one Seral ATA devce.
Important
Please do not fold the Seral ATA cable nto 90-degree angle. Otherwse, data loss may
occur durng transmsson.
Fan Power Connectors: CPUFAN1, SYSFAN1
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor's offical webste or consult
•
the vendors for proper CPU coolng fan.
• CPUFAN1 supports fan control. You can nstall Dual Core Center utlty that wll auto-
matcally control the CPU fan speed accordng to the actual CPU temperature.
• Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN1.
• SYSFAN1 support fan control, too. You may select how percentage of speed for the
SYSFAN1 n BIOS.
2-12
CPUFAN1 SYSFAN1