Ip&Mac Binding; Binding Settings - TP-Link TD-W8970 User Manual

TD-W8970
3. Click the Save button.
Click the Enable/ Disable Selected button to make selected entries enabled or disabled.
Click the Delete Selected button to delete selected entries.
4.16 IP&MAC Binding
There are two submenus under the IP &MAC Binding menu: Binding Settings and ARP List.
Click any of them, and you will be able to scan or configure the corresponding function. The
detailed explanations for each submenu are provided below.

4.16.1 Binding Settings

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your
desire (shown in Figure 4-88).
MAC Address: The MAC address of the controlled computer in the LAN.
IP Address: The assigned IP address of the controlled computer in the LAN.
Bounding Status: Check this option to enable ARP binding for a specific device.
Edit: To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or
Edit button, and then you will go to the next page. This page is used for adding or modifying an IP
& MAC Binding entry (shown in Figure 4-89.)
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-88
Figure 4-89
86