Table of Contents
Advertisement
3.
Select the method for adding the
WPS client. A WPS client can be added
using the Push Button method or the
PIN method.
Using the Push Button.
This is the preferred method.
•
Select the Push Button radio box and
either press the WPS Push Button on the
side of the router or click the soft WPS
Push Button on the screen (as shown
on right).
•
The router will attempt to communicate
with the client; you have 2 minutes to
enable WPS from the client device using
the client's WPS networking utility.
entering a PiN. If you want to use the
PIN method, select the PIN radio box.
A screen similar to the one shown on the
right displays.
•
Go to your wireless client and, from
obtain the wireless client's security PIN,
or follow the client's WPS utility
instructions to generate a security PIN.
Then, enter this PIN in the enter
•
Client's PiN field provided on the
router and click Next. You have
4 minutes to enable WPS on the
router using this method.
1382777E 0411 166321.indd 7
USING PUSH 'N' CONNECT (WPS) TO CONFIGURE YOUR WIRELESS
the client's WPS utility,
7
7/04/11 10:42 AM
Hide quick links:
Advertisement
Table of Contents
